Abstract:Separation of carbon dioxide from a humid mixture of CO2-N-2 through membranes containing immobilized solutions of Na2CO3-glycerol in porous and hydrophilic poly(vinylidene fluoride) (PVDF) substrate was experimentally studied for use as a venting membrane in space-walk applications. The effects of Na2CO3 concentration, CO2 partial pressure, and feed stream relative humidity (RH) were investigated. The carbonate concentration was in the range of 0-4.0 mol/dm(3). The feed gas RH range was 49-100%; the sweep gas was dry helium. CO2 partial pressure (p(CO2,f)) range was 0.007-0.77 arm. Addition of Na2CO3 increased the CO2 permeability drastically at lower carbonate concentrations; at higher Na2CO3 concentrations, this permeability increase is partly compromised by increased solution viscosity and salting-out effect. N-2 permeability coefficient decreased with an increase in Na2CO3 concentration. Very high CO2/N-2 selectivities were observed at high Na2CO3 concentrations. Higher CO2/N-2 selectivities were observed at lower CO2 partial pressure differentials. Steady-state water content in the hygroscopic immobilized liquid membrane (ILM) increases with an increase in feed stream RH. The water content in the ILM considerably affects its viscosity and the effective concentration of the carriers in the ILM; those factors determine the permeation performances of the ILM. Generally, lower permeances and greater CO2/N-2 selectivity values were observed at lower feed stream RHs. When the feed RH = 50.7%, P-CO2,P-f = 0.007 atm and the Na2CO3 concentration was 1.0 mol/dm(3); the separation factor alpha(CO2/N-2) observed was 3440. Prolonged runs lasting 14 days showed that the ILM permeation performances were quite stable. The ILMs were also found to be stable when challenged with feed streams of very low RHs.

Oxygen Separation Through U‐shaped Hollow Fiber Membrane Using Pure CO2 As Sweep Gas

Selective CO2 Separation from CO2−N2 Mixtures by Immobilized Carbonate−Glycerol Membranes

Oxy-Fuel Combustion for Co2 Capture Using A Co2-Tolerant Oxygen Transporting Membrane

Oxygen Permeation Through a CO2‐tolerant Mixed Conducting Oxide (Pr0.9la0.1)2(ni0.74cu0.21ga0.05)o4+δ

Effect of CO2 and SO2 on Oxygen Permeation and Microstructure of (pr0.9la0.1)2(ni0.74cu0.21ga0.05)o4+δ Membranes

Co2-Stable and Cobalt-Free Dual-Phase Membrane for Oxygen Separation

CO2-tolerant alkaline-earth metal-free single phase membrane for oxygen separation

Anion Doping CO2-stable Oxygen Permeable Membranes for Syngas Production

A CO2-stable K2NiF4-type oxide (Nd 0.9La0.1)2(Ni0.74Cu 0.21Al0.05)O4+δ for oxygen separation

Enhancement of Oxygen Permeation Through U-Shaped K2nif4-Type Oxide Hollow Fiber Membranes by Surface Modifications

High Oxygen Permeation Through A-site Deficient K 2 NiF 4+δ -Type Oxide Hollow-Fiber Membrane

Influence of the Preparation Methods on the Microstructure and Oxygen Permeability of a CO2‐stable Dual Phase Membrane

Rapid Glycine-Nitrate Combustion Synthesis of the CO2-stable Dual Phase Membrane 40mn1.5co1.5o4−δ–60ce0.9pr0.1o2−δ for CO2 Capture Via an Oxy-Fuel Process

High-flux dual-phase percolation membrane for oxygen separation

La 0.8 Sr 0.2 Cr 0.5 Fe 0.5 O 3−δ (lscf)–zr 0.8 Y 0.2 O 2−δ (YSZ) Based Multilayer Membrane for CO 2 Decomposition

High Co2 Permeation Flux Enabled By Al(2)O(3) Modifier And In-Situ Infiltration Of Molten Carbonate Into Gd-Doped Ceo2 As A Co2 Separation Membrane

CO2-Tolerant Oxygen-Permeable Fe2O3-Ce0.9Gd0.1O2-δDual Phase Membranes

A CO2-tolerant nanostructured layer for oxygen transport membranes

Novel Cobalt-Free, Noble Metal-Free Oxygen-Permeable 40Pr0.6sr0.4feo3-Δ–60ce0.9pr0.1o2−δ Dual-Phase Membrane

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

A CO2-tolerance Oxygen Permeable 60ce0.9gd0.1o2−δ–40ba0.5sr0.5co0.8fe0.2o3−δ Dual Phase Membrane