Abstract:Al 2 O 3 -PES-SPEEK/MBAE composites has been prepared, polymer matrix (MBAE) was obtained with 4,4’-diamino diphenyl methane bismaleimide (BMI) as reaction monomer, 3,3’-diallyl bisphenol A (BBA) and bisphenol A diallyl ether (BBE) as the reactive diluent, and two kinds of thermal plastic resins (polyether sulfone PES and sulfonated poly(ether ether ketone) SPEEK) as the reinforcements, nano-alumina (Al 2 O 3 ) prepared by Sol–Gel method as the filler. The microstructure of SPEEK, Al 2 O 3 and the composites were characterized, the mechanical properties and heat resistance of the composites were also studied and analyzed. The results reveal that there are sulfonic acid groups in SPEEK structure and the microstructure is more loose, and the degree of sulfonation is about 41.3%. Al 2 O 3 is a nano-sized short-fibrous crystal with hydroxyl groups on its surface. The micromorphology of Al 2 O 3 -PES-SPEEK/MBAE composites show that the proper amount of PES, SPEEK and Al 2 O 3 are uniformly dispersed in the matrix resin, which improves the fracture surface morphology of the composite, the shape of the section is fish scale and the fracture cracks are irregular and divergent, and the composites are ductile fracture. The mechanical properties indicate that the flexural strength, flexural modulus and impact strength of the composite is the maximum value 172.9 MPa, 4.7 GPa and 21.4 kJ/m 2 , which is 73.1%, 74.1% and 125.3%, higher than the matrix resin, respectively, when the PES content is 3 wt%, 2 wt% SPEEK and 3 wt% Al 2 O 3 in the composite. At this time, the thermal decomposition temperature of the composite material is 453.5°C, which is 15.4°C higher than that of the matrix resin, and the mechanical properties and heat-resistance properties of the Al 2 O 3 -PES-SPEEK/MBAE composite are significantly improved.

Enhanced mechanical and dielectric properties of lamellar aluminum phosphate/bismaleimide composites by interface modification with maleimidopropyl triethoxysilane

Self-reinforced aluminum phosphate framework/bismaleimide composites with double cross-linking hybrid structures

Bismaleimide-modified methyl-di(phenylethynyl)silane blends and composites: Cure characteristics, thermal stability, and mechanical property

Mechanical and thermal properties of synergistic modification of bismaleimide polymer composites with nano‐SiO2 and hyperbranched polyimide

Interfacial Modification for an Aluminum/epoxy Resin Laminated Composite

Modification on Glass Fiber Surface and Their Improved Properties of Fiber-Reinforced Composites Via Enhanced Interfacial Properties

Improved Microhardness and Microtribological Properties of Bismaleimide Nanocomposites Obtained by Enhancing Interfacial Interaction Through Carbon Nanotube Functionalization

Secondary dispersion of BaTiO 3 for the enhanced mechanical properties of the Poly (arylene ether nitrile)-based composite laminates

Understanding of the Modified Bismaleimide Composite with Multifunctional Phthalonitrile and Its Outstanding Mechanical Properties

Preparation and Properties of Bismaleimide-modified Methyl-Di (phenylethynyl) silane Composites

Mechanical, thermal, electrical, and interfacial properties of high-performance bisphthalonitrile/polyarylene ether nitrile/glass fiber composite laminates

Surface modification of aramid fiber by crystalline polyarylene ether nitrile sizing for improving interfacial adhesion with polyarylene ether nitrile

Improving Tribological Properties of Bismaleimide Nanocomposite Filled with Carbon Nanotubes Treated by Atmospheric Pressure Filamentary Dielectric Barrier Discharge

The Intercalation of Poly(methyl Methacrylate)/aluminophosphate Nanocomposites and the Properties Improvement

Fabrication and characterization of OMMt/BMI/CE composites with low dielectric properties and high thermal stability for electronic packaging

Improved Tribological Properties of Poly(methyl methacrylate) Based Composites by the Synergistic Effect of Incorporating Ultra-High Molecular Weight Polyethylene and Heat Treatment

Microstructure, mechanical properties and heat-resistance properties of bismaleimide composites modified synergistically by alumina and two kinds of thermoplastic resins

The Effect of Bismaleimide on Thermal, Mechanical, and Dielectric Properties of Allyl-Functional Bisphthalonitrile/bismaleimide System

Enhanced toughness and thermal conductivity for epoxy resin with a core–shell structured polyacrylic modifier and modified boron nitride

Optimization and preparation of an allyl phenoxy-modified bismaleimide resin

Mechanical and thermal properties of a novel bismaleimide matrix resin for high-performance composite materials