Abstract:Based on the dynamic mechanical spectroscopy, limitations arise when investigating amorphous Fe-based alloys due to their inherent brittleness and the absence of β-relaxation. To address this challenge, precise control over alloy elements and promoting structural heterogeneity at the atomic scale are known as strategies to increase their plasticity. The Fe 74 B 20 Nb 2 Hf 2 Si 2 bulk metallic glass (BMG), enriched with Hf and Nb, is a noteworthy example. This alloy exhibited significant shear transformation zones (STZs) nucleation sites and β-relaxation, attributed to a notable negative mixing enthalpy of mixing Hf and Nb with other alloy elements, along with a favorable Poisson's ratio. By applying Arrhenius' equation, we deduced activation energies of 164 kJ/mol for β-relaxation and 295 kJ/mol for α-relaxation. Remarkably, the modest activation energy associated with β-relaxation suggests a correlation with the expansion of loose packing regions concurrent with the enhancement of β-relaxation within the alloy. Also, using quasi-point defects (QPD) theory, structural heterogeneity characteristics revealed that the correlation factor increases as temperature rises above the glass transition temperature ( T g ). This can be attributed to increasing defect concentrations and improved atomic mobility, providing a plausible explanation for the observed phenomenon. As a result, amorphous alloys with the composition Fe 74 B 20 Nb 2 Hf 2 Si 2 , exhibiting enhanced plasticity, can be considered promising candidate for various industrial applications.

Synthesis of iron-based bulk metallic glasses as nonferromagnetic amorphous steel alloys

Fabrication of Fe-Based Bulk Amorphous Alloys Using Hot Metal and Commercial Ferro-Alloys

Preparation of Bulk Amorphous Fe–Ni–P–B–Ga Alloys from Industrial Raw Materials

Structural Properties and Thermal Stability of Glassy (Zr<sub>.65</sub>Al<sub>.075</sub>Cu<sub>.175</sub>Ni<sub>.1</sub>)<sub>100-x</sub>Fe<sub>x</sub> (x≤20) Alloys Prepared by Mechanical Alloying

Ductile Fe-Based Amorphous Alloys with High Iron Content

PREPARATION AND PROPERTIES OF BULK AMORPHOUS Fe-Ni-P-B-Ga ALLOYS

Novel tin-added bulk amorphous Fe-based alloys

Magnetic and Thermal Studies of Iron-Based Amorphous Alloys Produced by a Combination of Melt-Spinning and Ball Milling

Formation of ferromagnetic bulk amorphous Fe40Ni40P14B6 alloys

Structural Properties and Thermal Stability of Glassy (Zr.65al.075cu.175ni.1)100-Xfex (x≤20) Alloys Prepared by Mechanical Alloying

Preparation of amorphous Fe-Zr alloys by mechanical alloying and melt spinning methods

Atomic level simulation of amorphous/nanocrystalline transition behavior in the Fe based amorphous alloys

Bulk amorphous and nanocrystalline alloys with high functional properties

Novel Tin-Containing Fe-Base Glassy Alloys

Development of high Bs Fe–Ni-based metal amorphous nanocomposite by optimization of glass-forming ability

Fe-based amorphous coatings: Structures and properties

Magnetic Field Effects on Crystallization of Iron-Based Amorphous Alloys

The saturation magnetisation, Curie temperature and size effect of amorphous iron alloys

Phase Formation of Iron-Based Superconductors during Mechanical Alloying

Developing novel amorphous alloys from the perspectives of entropy and shear bands

Investigating the structural properties of a novel soft magnetic Fe-based amorphous alloy by dynamic mechanical relaxation