Effect of Zn2+ on the extraction of copper by cyclone electrowinning from simulated copper-containing electrolyte

Yan Wang,Bo Li,Yonggang Wei,Hua Wang

DOI: https://doi.org/10.1016/j.seppur.2021.120014

IF: 8.6

2022-02-01

Separation and Purification Technology

Abstract:Cyclone electrodeposition has obvious advantages in the treatment of composite metal electrolyte. The effect of impurity metal ions on electrodeposition of copper by cyclone electrodeposition was investigated. Different concentrations of Zn2+ in copper electrolyte have different effects on electrodeposition. The current efficiency of cyclone electrodeposition with different concentrations of Zn2+ and the concentration of Cu2+ and Zn2+ in copper electrolyte at different deposition times were measured. The purity and morphology of cathode copper obtained by electrodeposition were determined. The results show that the higher the addition of Zn2+, the higher the concentration of Cu2+ at the terminal point, the lower the removal rate of Cu2+ in the electrolyte and the lower the current efficiency of the cyclone electrodeposition process. With the increase of the amount of Zn2+, the dendrite morphology of cathode copper gradually forms after the three-stage electrodeposition. With the progress of the electrodeposition process and the increase of the amount of Zn2+, more and more dendrites will be produced on cathode copper. Therefore, when the composite copper electrolyte (such as copper electrolyte or copper waste liquid) is purified by cyclone electrodeposition, the content of Zn2+ in the composite copper electrolyte should be controlled below 3 g /L to obtain cathode copper products with good quality and good morphology.

engineering, chemical