Abstract:High‑silicon iron ore tailings (IOTs) as mineral solid wastes derived from the processing and utilization of iron ore, which would threaten human health and the ecological environment if handled improperly. Coincidently, it consists of abundant quartz gangue. In this study, we proposed a superconducting high gradient magnetic separation (S-HGMS) coupling with acid leaching technology to prepare high-grade silica from high‑silicon IOTs. S-HGMS was applied to high‑silicon IOTs to pre-concentrate silica into quartz concentrate. Under the optimized conditions, the SiO2 grade in quartz concentrate reached 92.06% with a SiO2 recovery of 43.54%. The results indicate that the S-HGMS effectively achieved a selective separation of silica from high‑silicon IOTs, but entrainment occurred between silica and sub-micron impurities particles, reducing the SiO2 grade and recovery. Quartz concentrate was then subjected to a mixed acid leaching to remove metallic impurities. Under the conditions of the ratio of mixed acid of 5 mol/L HCl + 1 mol/L HF, leaching temperature of 353.15 K, and leaching time of 12 h, the SiO2 purity of high-grade silica reached 99.51%, and the removal efficiency of Fe, Al, Mg, and Ca from quartz concentrate was 95.20%, 85.60%, 97.99%, and 97.19%, respectively. During the leaching process, HF played a vital role and its' nucleophilic attack can provide the effective removal of metallic impurities. The dissolution behaviors of Fe, Al, Mg, and Ca were described as shrinking core models, but their controlled steps were significantly different. Thermodynamic results indicate that Fe, Al, Mg, and Ca leaching processes were dominated by ΔS 0 rather than ΔH 0, and their ΔG 0 from lowest to highest were Δ G 0 Ca < Δ G 0 Mg < Δ G 0 Fe < Δ G 0 Al < 0 , indicating that Ca ion may be leached more easily. Ultimately, a prospect was proposed for the high-value application of high‑silicon IOTs resource. This study provides valuable insight to realize the recycling and utilization of tailings for its industrialization.

Green recovery of potassium and aluminum elements from alunite tailings using gradient leaching process

Leaching Kinetics and Mechanism of Alunite from Alunite Tailings in Highly Concentrated KOH Solution

Stepwise extraction of lithium and potassium and recovery of fluoride from aluminum electrolyte wastes through calcification roasting-two-stage leaching

Comprehensive Utilization of Al-Goethite-Containing Red Mud Treated Through Low-Temperature Sodium Salt-Assisted Roasting–Water Leaching

A novel combined metallurgy-beneficiation method for the facile and low-cost comprehensive resource utilization of low-grade kaolin solid wastes

Green and sustainable recovery of feldspar and quartz from granite tailings

Optimizing iron separation and recycling from iron tailings: A synergistic approach combining reduction roasting and alkaline leaching

Potassium fixation and the separation from sodium through the formation of K-alunite using activated aluminum hydroxide

Clean dealkalization technology from aluminum industry hazardous tailings—red mud by displacement with Mg-based agent

Recovery and preparation of high-grade silica from iron ore tailings by S-HGMS coupling with acid leaching technology: Description of separation mechanism and leaching kinetics

Sustainable application of sodium removal from red mud: Cleaner production of silicon-potassium compound fertilizer

Rare earth element recovery and aluminum-rich residue production from high alumina fly ash by alkali pre-desilication enhance the mechanochemical extraction process

An Innovative Technique for Comprehensive Utilization of High Aluminum Iron Ore via Pre-Reduced-Smelting Separation-Alkaline Leaching Process: Part I: Pre-Reduced-Smelting Separation to Recover Iron

A cleaner electrolysis process to recover alumina from synthetic sulfuric acid leachate of coal fly ash

Energy-efficient leaching process for preparation of aluminum sulfate and synergistic extraction of Li and Ga from circulating fluidized bed fly ash

Recovery lithium and potassium from lepidolite via potash calcination-leaching process

Aluminium leaching from red muds for their complexing reprocessing

A novel process for one-step preparing potassium-containing fertilizer using red mud or CFA synergistic extraction of alumina

Separation of alumina from aluminum-rich coal fly ash using NaOH molten salt calcination and hydrochemical process

Alumina Recovery from Kaolin with Mineral Impurities

A novel approach for extracting lithium from overhaul slag by low temperature roasting – water leaching