Abstract:The injection of urea-water solution (UWS) sprays into engine-close selective catalytic reduction (SCR) systems faces developers with complex challenges regarding two-phase flow and deposit formation. Potential spray impact on the static mixing elements inside the exhaust duct can lead to accumulation of liquid film and solid deposits, which may result in detachment of large UWS droplets at the trailing edges of the mixer blades. Present work focuses on the mechanisms of film and deposit formation within the scope of a joint study on spray preparation in the mixing section of SCR systems. A production type SCR exhaust system is used for optical investigations on gas flow and UWS droplets at the mixing element using Laser Doppler Anemometry (LDA) and Long Distance Microscopy (LDM) with a high-speed camera. Measured shear flows inside the mixing element are up to three times higher than the flow velocity upstream the mixer. Here, a decrease of droplet diameters of detached droplets is revealed with increased shear flow velocity. Characteristic urea deposits are created in a laboratory test bench and their surface structure is measured by use of Confocal Microscopy. Results show highly rough surface structures, which are used as input parameters together with the flow measurements to define the computational domain at the trailing edge of the mixer blades. Smoothed Particle Hydrodynamics (SPH) method is adopted for the numerical simulation of the transient two-phase flow and validated by LDM high-speed recordings of droplet detachment. Comparisons reveal a distinct influence of solid depositions on the re-atomization of the liquid film at the rear edge of the mixer blade. By interface resolving simulations with a phase-field method, the wall impingement of a sequence of large secondary droplets and associated film formation are studied. The results indicate that UWS film formation at the exhaust pipe wall may be reduced by hydrophobic surfaces and high gas velocities near the wall.

Coupling of Liquid and Surface Chemistry in Urea SCR Systems

Fluid Mixing Optimization Strategy of Catalytic Reactor for Marine SCR System

Robust, Model-Based Urea Dosing Control for SCR Aftertreatment Systems using a Cross-Sensitive Tailpipe NOx Sensor

A Holistic View on Urea Injection for NOx Emission Control: Impingement, Re-atomization, and Deposit Formation

Deposit Formation from Urea Injection: a Comprehensive Modeling Approach

Quasi 1D Modeling of Two-Phase Flow and Deposit Formation for Urea-Selective Catalytic Reduction Systems

Multi-Scale SCR Modeling, 1D Kinetic Analysis and 3D System Simulation

Modeling and Simulation of Urea-Water-solution Droplet Evaporation and Thermolysis Processes for SCR Systems

Modeling the decomposition and byproduct formation of a urea-water-solution droplet

Modeling the Effect of Nonuniformities from Urea Injection on SCR Performance Using CFD

3D Modeling of Flow, Spray of Reductant and Surface Chemical Reaction in Diesel Urea SCR-NOx Catalytic Converter

Urea Injection and Uniformity of Ammonia Distribution in SCR System of Diesel Engine

Numerical Investigation on the Urea Deposit Formation Process in a Selective Catalytic Reduction System of a Diesel Engine Based on a Fluid–Solid Coupling Method

Numerical analysis of ammonia homogenization for selective catalytic reduction application

Quasi One-Dimensional Numerical Simulation of Gas-Liquid Two Phase Flow in SCR System of Diesel Engine

Optimization Analysis of Various Parameters Based on Response Surface Methodology for Enhancing NOx Catalytic Reduction Performance of Urea Selective Catalytic Reduction on Cu-ZSM-13 Catalyst

Experiment and Simulation of Ammonia Distribution Uniformity for Diesel Engine Urea-SCR

Estimation of Ammonia Storage Nonuniformity for Urea-Based Selective Catalytic Reduction Systems

Laser Raman Spectroscopic Investigation on the Conversion of Molten Urea into NH3 for the Selective Catalytic Reduction of NOx in Oxygen-Rich Exhaust Gases

Simulation of the flow field and the chemical reaction coupling of selective catalytic reduction (SCR) system using an orthogonal experiment

Urea-related Reactions and Their Active Sites over Cu-SAPO-34: Formation of NH3 and Conversion of HNCO