Abstract:An improved multi-dimensional CFD code has been employed to simulate the spray, combustion and pollution formation process within a diesel engine cylinder. The computational results are compared with experimental data from an optical high-speed research engine equipped with a high-pressure injection system. Several spray sub-models have been implemented into the code, and their influence on the predicted droplet characteristic was evaluated. These models account for liquid core atomization, droplet secondary breakup, spray/wall interaction, droplet turbulent dispersion and evaporation. These models improve the prediction of the droplet sizes within a diesel spray and provides a more accurate initial condition for the evaporation, combustion models. The combustion sub-model employed has two components: one for predicting auto-ignition and one for computing the subsequent combustion of the ignited gas. Thermal NOx formation is calculated according to the extended Zeldovich mechanism, which gives the NOx formation as a function of temperature and O, H and OH radical concentrations. Soot formation process adopted in present study is modeled according to a hybrid chemical kinetics/turbulent mixing controlled rate expression. For the engine configurations and operating conditions considered, in most case the calculated cylinder averaged results show good agreement between measured and global pressure, heat release rate and emission data, but in some case they have limitations. Discrepancies are highlighted and possible reasons suggested. The major influences of the injection timing and combustion chamber geometry on the pollutant formation processes have been identified. The calculated results provide a detailed insight into the processes governing combustion and pollutant formation in spray flames under diesel engine conditions. The good agreement indicates that computer models are available for use by the engine industry to provide directions for engine design.

Quasi One-Dimensional Numerical Simulation of Gas-Liquid Two Phase Flow in SCR System of Diesel Engine

Quasi 1D Modeling of Two-Phase Flow and Deposit Formation for Urea-Selective Catalytic Reduction Systems

Modeling and Numerical Simulation of Diesel Engine SCR Deposit

Numerical Simulation to Reduce NOx of Diesel Engine Urea-SCR System

3D Modeling of Flow, Spray of Reductant and Surface Chemical Reaction in Diesel Urea SCR-NOx Catalytic Converter

Influence of Urea-SCR System Parameters on NOx Conversion Rate and Liquid Film

Urea Injection and Uniformity of Ammonia Distribution in SCR System of Diesel Engine

Modeling and Simulation of Urea-Water-solution Droplet Evaporation and Thermolysis Processes for SCR Systems

Modeling and simulation of SCR system for diesel engines

Numerical simulation of inner abrasion in a selective catalytic reduction deNOx device

Mixing and Evaporation Analysis of a High-Pressure SCR System Using a Hybrid LES-RANS Approach

Study of Numerical Simulation for Internal EGR of Diesel Engine

Numerical Investigation of Combustion and Emission With Different Diesel Surrogate Fuel by Hybrid Breakup Model

Multi-Scale SCR Modeling, 1D Kinetic Analysis and 3D System Simulation

Numerical Investigation on the Urea Deposit Formation Process in a Selective Catalytic Reduction System of a Diesel Engine Based on a Fluid–Solid Coupling Method

Coupling of Liquid and Surface Chemistry in Urea SCR Systems

Simulation of the flow field and the chemical reaction coupling of selective catalytic reduction (SCR) system using an orthogonal experiment

Numerical simulation of two-phase flow in the annular gap scrubber of converter Gas

Deposit Formation from Urea Injection: a Comprehensive Modeling Approach

Experimental Investigation and Numerical Modeling of Spray Combustion and Emission in a Diesel Engine

Numerical Simulation and Optimization of Flow Field in the SCR Denitrification System on a 600 MW Capacity Units