Abstract:To compensate the disadvantage of traditional poly(vinylidene fluoride-co-hexafluoropropylene) (P(VdF-HFP)) based gel polymer electrolyte (GPE) with poor rate performance, new GPE system consisted of P(VdF-HFP) and poly(methyl vinyl ether-alt-maleic anhydride) (P(MVE-MA)) with different ratios were prepared by electrospinning technology using polyethylene (PE) as support. After introducing P(MVE-MA) into P(VdF-HFP) system, the performance of the blended membrane and the GPE was significantly improved. Especially M4 based GPE blended with the mass ratios of P(MVE-MA): P(VdF-HFP) = 75: 25 exhibited the best physical and electrochemical characterizations. The developed membranes with interconnected fibrous structure showed the average diameter of 0.1-2.0 mu m, which were facilitated for uptaking the liquid electrolyte and improving the ionic conductivity for corresponding GPEs. The introduced P(MVE-MA) copolymer presented higher decomposition voltage than P(VdF-HFP) copolymer from the calculation result of oxidation potential, leading to higher oxidative stability for blended GPE than pure P(VdF-HFP) based GPE. Furthermore, M4 based GPE presented remarkable interfacial compatibility with electrode and the lower polarization resistance, resulting in better cycling stability and rate performance, which had 96.5% capacity retention after 100 cycles and the discharge capacity at 5C kept 91.6% of 1C capacity in Li/GPE/LiNi0.5Mn1.5O4 coin cell, compared with P(VdF-HFP) based GPE that had 87.8% retained capacity after 100 cycles and 48.7% retention capacity at 5C.

Preparation and characterization of gel polymer electrolyte based on porous poly(methyl methacrylate) and poly(vinylidene fluoride) films for lithium ion batteries

Effects of PDMS with Polyether Side Chains on the Fluoropolymer Based Gel Lithium Electrolytes

Preparation Of Pvdf/P(Mma-Co-Pegma) Porous Membranes Via Phase Inversion Process For Gel Polymer Electrolyte

Preparation and Properties of Gel Membrane Containing Porous PVDF-HFP Matrix and Cross-Linked PEG for Lithium Ion Conduction

Fumed silica-doped poly(butyl methacrylate-styrene)-based gel polymer electrolyte for lithium ion battery

Preparation and characterization of a novel microporous PE membrane supporting composite gel polymer electrolyte

Study of poly (organic palygorskite-methyl methacrylate)/poly(vinylidene fluoride-co-hexafluoropropylene) blended gel polymer electrolyte for lithium-ion batteries

A novel polymer electrolyte based on PMAML/PVDF-HFP blend

Ionic Liquid‐Modified Silicon Nanoparticles Composite Gel Polymer Electrolyte for High‐Performance Lithium Batteries

Gel polymer electrolyte-based on PVDF/fluorinated amphiphilic copolymer blends for high performance lithium-ion batteries

Preparation and characterization of gel polymer electrolyte based on electrospun polyhedral oligomeric silsesquioxane-poly(methyl methacrylate)8/polyvinylidene fluoride hybrid nanofiber membranes for lithium-ion batteries

Preparation Of Poly (Dimethylsiloxane) Graft (Poly(Propylene Oxide)-Block-Poly (Ethylene Oxide) Modified Pvdf Separator And Its Use In Lithium Ion Batteries

Preparation and performance of gel polymer electrolyte based on electrospun polymer membrane and ionic liquid for lithium ion battery

Preparation and Performances of A Novel Gel Polymer Electrolyte

Gel Polymer Electrolyte with High Performances Based on Poly(methyl Methacrylate) Composited with Hydroxypropyl Methyl Cellulose by Phase Inversion Method for Lithium-Ion Batteries

Microporous Gel Electrolytes Based on Amphiphilic Poly(vinylidene Fluoride-Co-hexafluoropropylene) for Lithium Batteries

Gel Polymer Electrolyte Based on Polymethyl Methacrylate Matrix Composited with Methacrylisobutyl-Polyhedral Oligomeric Silsesquioxane by Phase Inversion Method

Preparation and Properties of Poly (vinylidene Fluoride)/poly(dimethylsiloxane) Graft (poly(propylene Oxide)-Block-poly(ethylene Oxide)) Blend Porous Separators and Corresponding Electrolytes

Study on PVDF-HFP/PMMA/CMC Blended Polymer as Membrane for Lithium-Ion Batteries

A Novel Composite Microporous Polymer Electrolyte Prepared with Molecule Sieves for Li-ion Batteries

Application of Poly(vinylidene Fluoride-Co-hexafluoropropylene) Blended Poly(methyl Vinyl Ether-Alt-maleic Anhydride) Based Gel Polymer Electrolyte by Electrospinning in Li-ion Batteries