Abstract:Two commercialized solid additives thieno[3,2‐b]thiophene (TT) and 3,6‐dibromothieno[3,2‐b]thiophene (TTB) are used to delicately regulate the blend film packing and crystallinity. High efficiencies of 17.75% with impressive thermal stability (T80 > 2800 h, 65 °C) and excellent photostability are achieved for TT‐treated PM6:Y6 devices and a significantly higher PCE of 18.3% is achieved employing D18:L8‐BO. Delicately manipulating nanomorphology is recognized as a vital and effective approach to enhancing the performance and stability of organic solar cells (OSCs). However, the complete removal of solvent additives with high boiling points is typically necessary to maintain the operational stability of the device. In this study, two commercially available organic intermediates, namely thieno[3,2‐b]thiophene (TT) and 3,6‐dibromothieno[3,2‐b]thiophene (TTB) are introduced, as solid additives in OSCs. The theoretical simulations and experimental results indicate that TT and TTB may exhibit stronger intermolecular interactions with the acceptor Y6 and donor PM6, respectively. This suggests that the solid additives (SAs) can selectively intercalate between Y6 and PM6 molecules, thereby improving the packing order and crystallinity. As a result, the TT‐treated PM6:Y6 system exhibits a favorable morphology, improved charge carrier mobility, and minimal charge recombination loss. These characteristics contribute to an impressive efficiency of 17.75%. Furthermore, the system demonstrates exceptional thermal stability (T80 > 2800 h at 65 °C) and outstanding photostability. The universal applicability of TT treatment is confirmed in OSCs employing D18:L8‐BO, achieving a significantly higher PCE of 18.3%. These findings underscore the importance of using appropriate solid additives to optimize the blend morphology of OSCs, thereby improving photovoltaic performance and thermal stability.

Intrinsic Role of Volatile Solid Additive in High‐Efficiency PM6:Y6 Series Nonfullerene Solar Cells

Simultaneously Enhancing Exciton/Charge Transport in Organic Solar Cells by an Organoboron Additive

A Broad-Spectrum Solid Additive to Further Boost High-Efficiency Organic Solar Cells via Morphology Regulation

Enhanced Π–π Interactions of Nonfullerene Acceptors by Volatilizable Solid Additives in Efficient Polymer Solar Cells

Integrated Omnidirectional Design of Non‐volatile Solid Additive Enables Binary Organic Solar Cells with Efficiency Exceeding 19.5%

MR-TADF emitter as a dual-functional solid additive to extend exciton lifetime and optimize morphology for organic solar cells with ‚ąľ19% efficiency

Highly Efficient and Stable Organic Solar Cells Enabled by a Commercialized Simple Thieno[3,2‐b]thiophene Additive

Oligothiophene Additive‐Assisted Morphology Control and Recombination Suppression Enable High‐Performance Organic Solar Cells

High‐Efficiency (16.93%) Pseudo‐Planar Heterojunction Organic Solar Cells Enabled by Binary Additives Strategy

Morphology Optimization by Non‐Halogenated and Twisted Volatile Solid Additive for High‐Efficiency Organic Solar Cells

Additive-induced intermolecular interaction enhancement enables highly efficient organic solar cells

Synergistic Effect of Solvent and Solid Additives on Morphology Optimization for High-Performance Organic Solar Cells

Volatilizable Solid Additive‐Assisted Treatment Enables Organic Solar Cells with Efficiency over 18.8% and Fill Factor Exceeding 80%

Efficient Hole Transfer via Delocalized Excited State in Small Molecular Acceptor: A Comparative Study on Photodynamics of PM6:Y6 and PM6:ITIC Organic Photovoltaic Blends

Revealing Morphology Evolution in Highly Efficient Bulk Heterojunction and Pseudo‐Planar Heterojunction Solar Cells by Additives Treatment

Gradual Optimization of Molecular Aggregation and Stacking Enables Over 19% Efficiency in Binary Organic Solar Cells

High-Performance PM6:Y6-Based Ternary Solar Cells with Enhanced Open Circuit Voltage and Balanced Mobilities Via Doping a Wide-Band-Gap Amorphous Acceptor.

Three-dimensional Solid Additive Suppresses Non-Radiative Recombination Loss to Boost Efficiency and Scalability in Organic Photovoltaics

A Three-Dimensional Solid Additive Suppresses Non-Radiative Recombination Loss to Boost Efficiency and Scalability in Organic Photovoltaics

Binary Additive–Induced Performance Improvement of PM7:PC71BM Organic Solar Cells with High Open‐Circuit Voltage and Enhanced Current Intensity

Binary Additive–Induced Performance Improvement of PM7:PC 71 BM Organic Solar Cells with High Open‐Circuit Voltage and Enhanced Current Intensity