Abstract:Two commercialized solid additives thieno[3,2‐b]thiophene (TT) and 3,6‐dibromothieno[3,2‐b]thiophene (TTB) are used to delicately regulate the blend film packing and crystallinity. High efficiencies of 17.75% with impressive thermal stability (T80 > 2800 h, 65 °C) and excellent photostability are achieved for TT‐treated PM6:Y6 devices and a significantly higher PCE of 18.3% is achieved employing D18:L8‐BO. Delicately manipulating nanomorphology is recognized as a vital and effective approach to enhancing the performance and stability of organic solar cells (OSCs). However, the complete removal of solvent additives with high boiling points is typically necessary to maintain the operational stability of the device. In this study, two commercially available organic intermediates, namely thieno[3,2‐b]thiophene (TT) and 3,6‐dibromothieno[3,2‐b]thiophene (TTB) are introduced, as solid additives in OSCs. The theoretical simulations and experimental results indicate that TT and TTB may exhibit stronger intermolecular interactions with the acceptor Y6 and donor PM6, respectively. This suggests that the solid additives (SAs) can selectively intercalate between Y6 and PM6 molecules, thereby improving the packing order and crystallinity. As a result, the TT‐treated PM6:Y6 system exhibits a favorable morphology, improved charge carrier mobility, and minimal charge recombination loss. These characteristics contribute to an impressive efficiency of 17.75%. Furthermore, the system demonstrates exceptional thermal stability (T80 > 2800 h at 65 °C) and outstanding photostability. The universal applicability of TT treatment is confirmed in OSCs employing D18:L8‐BO, achieving a significantly higher PCE of 18.3%. These findings underscore the importance of using appropriate solid additives to optimize the blend morphology of OSCs, thereby improving photovoltaic performance and thermal stability.

MR-TADF emitter as a dual-functional solid additive to extend exciton lifetime and optimize morphology for organic solar cells with ‚ąľ19% efficiency

Simultaneously Enhancing Exciton/Charge Transport in Organic Solar Cells by an Organoboron Additive

Synergistic Control of Multilength-Scale Morphology and Vertical Phase Separation for High-Efficiency Organic Solar Cells

Simultaneously Enhancing Exciton/Charge Transport in Organic Solar Cells by Organoboron Additive

A Broad-Spectrum Solid Additive to Further Boost High-Efficiency Organic Solar Cells via Morphology Regulation

Simultaneous Improvements in Efficiency and Stability of Organic Solar Cells via a Symmetric‐Asymmetric Dual‐Acceptor Strategy

Delayed fluorescence material-assisted high performance ternary organic solar cells realized by prolonged exciton lifetime and diffusion length

Achieving high-performance ternary organic solar cells by adding a high hole-mobility non-fullerene acceptor

Boosting efficiency and stability for organic solar cells by subtle management electron-withdrawing terminal of electron acceptors based on asymmetric dual-donor centra

High‐Efficiency Ternary Organic Solar Cells Based on the Synergized Polymeric and Small‐Molecule Donors

Additive-induced intermolecular interaction enhancement enables highly efficient organic solar cells

Non-Halogenated Polymer Donor-Based Organic Solar Cells with a Nearly 15% Efficiency Enabled by a Classic Ternary Strategy

Delayed Fluorescence Emitter Enables Near 17% Efficiency Ternary Organic Solar Cells with Enhanced Storage Stability and Reduced Recombination Energy Loss

Solid Additive Modulates Acceptor Crystallization to Achieve 19.11% Efficiency and High Storage Stability in Organic Solar Cells

Enhancing Intermolecular Packing and Light Harvesting through Asymmetric Non-Fullerene Acceptors for Achieving 18.7% Efficiency Ternary Organic Solar Cells

Synergistic Effect of Solvent and Solid Additives on Morphology Optimization for High-Performance Organic Solar Cells

Highly Efficient and Stable Organic Solar Cells Enabled by a Commercialized Simple Thieno[3,2‐b]thiophene Additive

15.3% Efficiency All-Small-molecule Organic Solar Cells Enabled by Symmetric Phenyl Substitution

Volatilizable Solid Additive‐Assisted Treatment Enables Organic Solar Cells with Efficiency over 18.8% and Fill Factor Exceeding 80%

Restrained Energetic Disorder for High-Efficiency Organic Solar Cells via a Solid Additive

High‐Efficiency (16.93%) Pseudo‐Planar Heterojunction Organic Solar Cells Enabled by Binary Additives Strategy