Abstract:To reveal the differences between the mechanical properties of solid waste coarse aggregate concrete and natural coarse aggregate concrete (NCAC) under equal strength, the basic mechanical properties of coarse aggregate concrete with seven different solid wastes (i.e., self-combusted coal gangue, uncombusted coal gangue, marble sheet waste, granite sheet waste, iron waste rock, recycled concrete, and self-combusted coal gangue ceramicite) were tested, and the trends in failure morphology, elastic modulus, and the stress–strain full curves of the different solid waste coarse aggregate concretes were analyzed and compared with NCAC. Finally, the interfacial structure of the concrete was characterized by SEM. The results showed that C30 strength grade concrete was prepared with different solid waste coarse aggregates; however, the 28 d compressive strength, split tensile strength, axial compression strength, flexural strength, and elastic modulus of the concrete was 35.26–47.35, 2.13–3.35, 26.43–42.70, 2.83–3.94, and 17.3–31.2, respectively. The modulus of elasticity of the solid waste coarse aggregate concrete was smaller than the NCAC under equal strength, with a maximum difference of 45%. The peak compressive strain and ultimate compressive strain were larger than the NCAC, with a maximum difference of 43%. The crushing value of the solid waste coarse aggregate affected the splitting tensile strength, flexural strength, and modulus of elasticity of the concrete to a greater extent than the compressive strength. The transition zone at the concrete interface of the coarse aggregates with different solid wastes varied widely. The porous micro-pumping effect of the self-combusted gangue and self-combusted gangue vitrified reinforced the concrete interface transition zone, and the polished surface of sheet waste, uncombusted gangue, and recycled concrete aggregate surface adhesion weakened the interface transition zone; Finally, the uniaxial compressive stress–strain curve model for concrete with different solid waste coarse aggregates was established based on the Guo Zhenhai model.

Distribution development of pore/crack expansion and particle structure of cemented solid-waste composites based on CT and 3D reconstruction techniques

Mechanical Properties and Microstructure of Calcium Sulfate Whisker-Reinforced Cement-Based Composites

Investigation on the Mechanical Properties and Strengthening Mechanism of Solid-Waste-Sulfur-Based Cementitious Composites

Mechanical properties and compressive constitutive relation of solid waste-based concrete activated by soda residue-carbide slag

CT scanning of internal crack mechanism and strength behavior of cement-fiber-tailings matrix composites

Design and Preparation Technology of Green Multiple Solid Waste Cementitious Materials

Mechanical performance, microstructure, and damage model of concrete containing steel slag aggregate

Experimental Study on Strength Development and Engineering Performance of Coal-Based Solid Waste Paste Filling Material

Mechanical properties and microscopic mechanism of solid waste based binder solidified stone waste

Study on mechanical properties and damage characteristics of coal-based solid waste cemented backfill

Mechanical Properties and Uniaxial Failure Behavior of Concrete with Different Solid Waste Coarse Aggregates

Study on Relationship between Pore Structure and Mechanical Properties of Concrete Using Municipal Solid Waste Incineration Bottom ash as Fine Aggregate

Study on the Alkali–Sulfur Co-Activation and Mechanical Properties of Low-Carbon Cementitious Composite Materials Based on Electrolytic Manganese Residue, Carbide Slag, and Granulated Blast-Furnace Slag

Optimization of Proportions and Solidification Mechanism of All-Solid Waste Cementitious Materials Based on Circulating Fluidized Bed Fly Ash, Calcium Carbide Slag, and Red Mud

Effect of Steel Slag and Granulated Blast-furnace Slag on the Mechanical Strength and Pore Structure of Cement Composites

Particle size distribution of aggregates effects on mesoscopic structural evolution of cemented waste rock backfill

Effect of Fiber Content on Mechanical Properties of Fiber-Reinforced CGF All-Solid-Waste Binder-Solidified Soil

Assessment of mechanical and heavy metal leaching behavior of resource-efficient engineered cementitious composites incorporating ultra-high-volume municipal waste incineration bottom ash

A Study on the Microstructure and Mechanical Properties of Portland Cement Incorporating Aluminosilicate Waste

Optimization design and microstructure analysis of ultra-high performance cement-based composites

Coupled Effect of MWCNTs Concentration and Induced Pore Structures on Compressive Performance and Elastic Modulus of Ultra-High Toughness Cementitious Composites: Experimental and Theoretical Studies