Design and Preparation Technology of Green Multiple Solid Waste Cementitious Materials

Yexin Ge,Xianping Liu,Zhonghe Shui,Xu Gao,Wu Zheng,Zengchao Zhu,Xudong Zhao

DOI: https://doi.org/10.3390/ma17091998

IF: 3.4

2024-04-26

Materials

Abstract:For solid waste-based cementitious materials, most scholars focus their research on the hydration reaction of cementitious materials, but there is still a lack of solid waste design that comprehensively considers mechanical properties and durability. Therefore, this article focuses on exploring the mix of design and the microscopic and macroscopic properties of multi solid waste cementitious materials (MSWCMs), namely steel slag (SS), slag powder (SP), desulfurization gypsum (DG), fly ash (FA), and ordinary Portland cement (OPC). According to the orthogonal experimental results, the compressive strength of MSWCMs is optimal when the OPC content is 50% and the SS, SP, DG, and FA contents are 10%, 20%, 5%, and 15%, respectively. The MSWCMs group with an OPC content of 50% and SS, SP, DG, and FA contents of 5%, 15%, 5%, and 25% was selected as the control group. The pure OPC group was used as the blank group, and the optimal MSWCMs ratio group had a 28-day compressive strength of 50.7 megapascals, which was 14% and 7.6% higher than the control group and blank group, respectively. The drying shrinkage rate and resistance to chloride ions were also significantly improved, with maximum increases of 22.9%, 22.6%, and 8.9%, 9.8%, respectively. According to XRD, TG-DTG, and NMR testing, the improvement in macroscopic performance can be attributed to the synergistic effect between various solid wastes. This synergistic effect produces more ettringite (AFt) and C-(A)-S-H gel. This study provides a good theoretical basis for improving the comprehensive performance of MSWCMs and is conducive to reducing the use of cement, with significant economic and environmental benefits.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering

What problem does this paper attempt to address?

### Problems the paper attempts to solve This paper aims to solve the problem of insufficient comprehensive consideration of mechanical properties and durability in cement - based materials based on solid waste. Specifically: 1. **Comprehensive optimization of mechanical properties and durability**: - Most scholars mainly focus on the hydration reaction of cement - based materials, but lack a comprehensive design of mechanical properties and durability. - This paper aims to fill this gap by exploring the mix proportion design and its micro - and macro - properties of various solid - waste - based cement - based materials (MSWCMs). 2. **Synergistic effect of multi - component solid - waste - based cement - based materials**: - Through the results of orthogonal experiments, the optimal MSWCMs mix proportion was determined, that is, the content of ordinary portland cement (OPC) is 50%, and the contents of steel slag (SS), slag powder (SP), desulfurized gypsum (DG) and fly ash (FA) are 10%, 20%, 5% and 15% respectively. - The compressive strength of MSWCMs at 28 days under this mix proportion reaches 50.7 MPa, which is 14% and 7.6% higher than that of the control group and the blank group respectively. 3. **Improving drying shrinkage rate and chloride ion resistance**: - Through X - ray diffraction (XRD), thermogravimetry - derivative thermogravimetry (TG - DTG) and nuclear magnetic resonance (NMR) tests, it was found that the improvement of macro - properties is attributed to the synergistic effect among various solid wastes, and this synergistic effect generates more ettringite (AFt) and C-(A)-S - H gel. - The drying shrinkage rate and chloride ion resistance are also significantly improved, with the maximum increases of 22.9%, 22.6% and 8.9%, 9.8% respectively. 4. **Economic and environmental benefits**: - The research in this paper provides a theoretical basis for improving the comprehensive performance of MSWCMs, helps to reduce the use of cement, and has significant economic and environmental benefits. In summary, through systematically studying and optimizing the mix proportion of various solid - waste - based cement - based materials, this paper aims to improve their mechanical properties and durability, while reducing the use of cement, so as to achieve dual economic and environmental benefits.

Design and Preparation Technology of Green Multiple Solid Waste Cementitious Materials

Study on Mixing Cement-Waste By-Product to Stabilize Soft Marine Clay

Mechanical properties and microscopic mechanism of solid waste based binder solidified stone waste

Mechanical properties and chemical microscopic characteristics of all-solid-waste composite cementitious materials prepared from phosphogypsum and granulated blast furnace slag

Synergetic Mechanism of Multiple Industrial Solid Waste-Based Geopolymer Binder for Soil Stabilization: Optimization Using D-Optimal Mixture Design

Research on Sustainable Development of Fine-Grained Material Cement Slurry

Research on the hydration process of solid waste–based cementitious materials and application in roadbase

Performance Optimization of Alkaline Multi-Industrial Waste-Based Cementitious Materials for Soil Solidification

Study on the Alkali–Sulfur Co-Activation and Mechanical Properties of Low-Carbon Cementitious Composite Materials Based on Electrolytic Manganese Residue, Carbide Slag, and Granulated Blast-Furnace Slag

Study on the preparation, performance, and mechanism for solid waste cementitious materials

Optimization of Controlled Low-Strength Material from Multi-Component Coal-Based Solid Waste

Enhancement of ultra-fine slag on compressive strength of solid waste-based cementitious materials: Towards low carbon emissions

Research on Mechanical and Shrinkage Characteristics of a Resource-Based Cement Solid-Waste Concrete

Performance Evaluation and Mechanism Study of Solid Waste-Based Cementitious Materials for Solidifying Marine Soft Soil under Seawater Mixing and Erosion Action

Study on preparation and activation enhancement effect of cold bonded multi-solid waste wrap-shell lightweight aggregates (SWSLAs) with low cement content

Optimization design and mechanical properties of multi-component ecological gelling materials

The synergistic hydration mechanism and environmental safety of multiple solid wastes in red mud-based cementitious materials

Utilization of waste marine dredged clay in preparing controlled low strength materials with polycarboxylate superplasticizer and ground granulated blast furnace slag

Optimization of Proportions and Solidification Mechanism of All-Solid Waste Cementitious Materials Based on Circulating Fluidized Bed Fly Ash, Calcium Carbide Slag, and Red Mud

Synchronous recycling of multi-source solid wastes for low-carbon geopolymer preparation: Primary factors identification and feasibility assessment

Effect of water quenched silicomanganese slag as fine aggregate on mechanical properties and microstructure characteristics of solid waste-based mortar and concrete