Abstract:Selective laser melting (SLM) is an attractive additive manufacturing technique for fabricating high-performance superalloys engineering components. Unfortunately, these as-built parts generally exhibit unsatisfied mechanical properties because of their natural thermal residual stress and non-equilibrium microstructures. Ultrasonic shot peening (USP) can effectively inhibit defect expansion and even close pores, thereby improving the mechanical properties of alloys. In this study, the internal defects, residual stress and microhardness redistribution, tensile properties, as well as microstructural response of the GH3230 alloy treated by different ultrasonic peening time are systematically studied. USP treatment induces a significant carbides fragmentation and synthesizes surface gradient heterogeneous structure, which displays a microstructure gradient in grain size, carbides size and dislocation density from surface to core. Long-time USP treatment induces work softening of GH3230 alloys. The work softening mechanism of the GH3230 alloys after long-time USP treatment is ascribed to the increase of surface temperature and high stored strain energy. Both the microhardness and residual compressive stress in the softened region of GH3230 alloys are reduced. Work softening effect increases the surface plasticity of the GH3230 sample, which induces deeper gradient structure. The various strengthening mechanisms of gradient heterogeneous structures, as well as the multiple effects of hetero deformation induced (HDI) hardening, and densification strengthening are responsible for achieving strength-ductility synergy. The research findings provide new insights based on USP for improving the mechanical properties of heterogeneous superalloys engineering components.

Effects of ultrasonic peening treatment layer by layer on microstructure of components fabricated by wire and arc additive manufacturing

The effects of ultrasonic frequency pulsed arc on wire + arc additively manufactured high strength aluminum alloys

Influence of heat treatment on the microstructure and mechanical properties of Al–Mg–Si alloy fabricated by double wires + arc additive manufacturing

Grain refinement and mechanical properties improvement of Inconel 625 alloy fabricated by ultrasonic-assisted wire and arc additive manufacturing

Effect and mechanism of inter-layer ultrasonic impact strengthening on the anisotropy of low carbon steel components fabricated by wire and arc additive manufacturing

Effects of heat treatment combined with laser shock peening on wire and arc additive manufactured Ti17 titanium alloy: Microstructures, residual stress and mechanical properties

Effect of ultrasonic shot peening on microstructure and mechanical properties of GH3230 superalloy during selective laser melt solution heat treatment

The effect of inter-layer cold working and post-deposition heat treatment on porosity in additively manufactured aluminum alloys

Microstructure evolution and mechanical properties of wire-arc-additively manufactured Al–Cu–Mg–Ag alloy

Periodic Microstructure of Al–Mg Alloy Fabricated by Inter-Layer Hammering Hybrid Wire Arc Additive Manufacturing: Formation Mechanism, Microstructural and Mechanical Characterization

Microstructure and properties research of Al-Zn-Mg-Cu alloy with high strength and high elongation fabricated by wire arc additive manufacturing

Effects of ultrasonic shot peening process on the microstructure and mechanical properties of nickel-based superalloys formed by selective laser melting

Processing aluminum alloy with hybrid wire arc additive manufacturing and ultrasonic nanocrystalline surface modification to improve porosity, surface finish, and hardness

Microstructure control of ultra-high-strength AlZnMgCu alloys fabricated by wire arc directed energy deposition: the role of variable polarity electric pulse

Integrated control mechanism of ultrasound and ZrO2 particles on differential microstructures for the wire arc additive manufacturing

Grain refining of Ti-6Al-4V alloy fabricated by laser and wire additive manufacturing assisted with ultrasonic vibration

Weakening the Anisotropic Property and Refining Prior-β Grains via Hammer Peening Treatment During Wire Arc Additively Manufacturing of Ti-6Al-4V

The influence of different ultrasonic impact treatment modes on microstructure and mechanical properties of 18Ni-300 steel fabricated by wire arc additive manufacturing

Wire-arc directed energy deposited Mg-Al alloy assisted by ultrasonic vibration: Improving properties via controlling grain structures

Evolution of microstructure and properties in 2219 aluminum alloy produced by wire arc additive manufacturing assisted by interlayer friction stir processing

Wire arc additive manufacturing of Al-Zn-Mg-Cu alloy: Microstructures and mechanical properties