Abstract:A new method for calculating rolling resistance is developed. This method includes a simplified structural model of a wheel in the form of a rigid cylinder with a thin viscoelastic rim. The wheel loading mode is considered in the absence of shearing (horizontal) force. In the entire contact area, it is assumed that the wheel is gripped with a non-deformable support surface. Deformation of the viscoelastic layer is analyzed on the basis of the Winkle model. In contrast to the previously known ones, the proposed method implies a description of the symmetry breaking in the distribution of contact pressure when a small torque is applied to the wheel, not exceeding the rolling resistance at rest. Contact pressure diagrams are obtained at different values of the torque applied to the wheel. It is shown that as the torque increases, the maximum value of the contact pressure increases, and the position of this maximum shifts in the direction of possible rolling. From the condition of violating the contact area dimensions at the beginning of rolling, an analytical expression is derived for the moment of rolling resistance at rest. The calculated dependence of this moment on the wheel draft is compared with known experimental data. When describing stationary free rolling, the asymmetry of the contact pressure corresponding to the beginning of rolling and the loss of energy during deformation of the viscoelastic material of the wheel rim are taken into account. The dependences of the coefficient of rolling resistance and wheel draft on the speed of the wheel center of mass at a fixed value of the vertical load are obtained. It is shown that taking into account the initial asymmetry of the contact pressure leads to a more intensive increase in the calculated estimates of the resistance coefficient and a less marked decrease in the wheel draft with an increase in rolling speed.

Calculation of the Effective Normal Stiffness of a Deformable Wheel with a Tilted Rotation Axis

The Influence of Tire Inflation Pressure on the Stress Distribution of Motorcycle Wheels

Study on the Design Method of Equal Strength Rim Based on Stress and Fatigue Analysis Using Finite Element Method

FEA on the impact test of aluminium alloy wheel

ANALYSIS STUDY ON BENDING FATIGUE TEST OF AUTOMOBILE WHEELS

CALCULATION OF THE COEFFICIENT OF FREE ROLLING RESISTANCE FOR THE WHEEL WITH DEFORMABLE RIM

Equivalent Vertical Stiffness Design of Modular Deformable Wheel

Influence Analysis of Machining and Installation Errors on the Radial Stiffness of a Non-Pneumatic Mechanical Elastic Wheel

Interactions of a Deformable Wheel with a Deformable Support Surface

Finite Element Analysis of a Flexible Ferris Wheel

POSSIBILITIES FOR OPTIMAL DESIGN OF A CAR TIRE BASED ON A CRITERION OF SPATIAL STRENGTH BALANCE

A new direct approach for evaluating the wheel-rail contact stiffness, including surface roughness and hardening effects

Numerical Modeling of a Railway Wheel Profile in a Fillet Radius Space Using the Uniform Search Method

Rotation of Stresses in French Wheel Tracking Test

Analysis on Influencing Factors of Lateral Stiffness of Mechanical Elastic Wheel

Optimization of the Stress-Strain State of Functional Gradient Structures with Stress Raisers

Wheel rolling on deformable ground with slippage

The stiffness adjustable wheel mechanism based on compliant spoke deformation

Investigation of the wear curves of the railway wheel and rail profiles when changing the radii of curvature

Study of relationship between lateral slip coefficient and indicators of tire linear stiffness

Design of the Wheel Profile of an Independently Rotating Wheel with Inverse Tread Conicity by Considering the Trajectory of the Center of Gravity