Abstract:For more than a century, rail corrugation has been exposed as one of the most serious problems experienced in railway networks. It also comes with a series of problems for maintenance, such as rolling noises and structural vibrations that can reduce lifetime of both train and track. This periodical phenomenon on rail surface is closely linked to wheel-rail contact dynamic, which depends on friction, train dynamics… To better understand corrugation birth conditions, a numerical model is suggested to complement the experimental limitations and to instrument a wheel-rail contact both locally and dynamically. At first, an appropriate tool was chosen to create the dynamic wheel-rail contact model to reproduce straight-track corrugation, also called “short-pitch” corrugation. The implicit dynamic finite element code Abaqus was chosen to investigate the dynamic local contact conditions. Both the origin and the evolution of straight-track corrugation under transient conditions (acceleration / deceleration) are studied. The parametrical sensibility of corrugation is thus investigated both with single/multiple wheel passing(s) and with geometric defect. A stick-slip phenomenon, linked to both wheel and rail dynamics coupled through the contact, is identified as the root of straight-track corrugation under transient conditions. Secondly, results obtained with the previous model have highlighted a quick decrease of corrugation amplitude with the increase of wheel passings over the rail. This last result seems to be in contradiction with reality. This problem comes from the difficulty to reliably manage contact dynamics, and particularly with local impacts, with the use of classical finite element models such as the one implemented in Abaqus. To compensate for this lack, a mass redistribution method is implemented in Abaqus and used with the previous case. The results show a more realistic corrugation growth according to the number of wheel passings.

A new direct approach for evaluating the wheel-rail contact stiffness, including surface roughness and hardening effects

Assessing the fast non-Hertzian methods for wheel-rail rolling contact integrated in the vehicle dynamics simulation

Influence of material properties on the high-speed wheel-rail rolling contact behaviour

Wheel-rail contact and friction models: A review of recent advances

In situ evaluation of contact stiffness in a slip interface with different roughness conditions using ultrasound reflectometry

Numerical tribology of the wheel-rail contact : Application to corrugation defect

Coupling effects of strain rate and fatigue damage on wheel-rail rolling contact behaviour: a dynamic finite element simulation

Contact Behavior Between Rail and Elastic Foundation

Investigation on the transient rolling contact behaviour of corrugated rail considering material work hardening

A fast method for solving conformal rolling contact problems

Wheel-rail rolling contact behavior induced by both rail surface irregularity and sleeper hanging defects on a high-speed railway line

New Tribological Aspects in the Micro-Areas of the Symmetric Rolling-Sliding Contact

Wheel-rail contact wear analysis on curved lubricated track for heavy haul locomotive studies

Improving the performance of finite element simulations on the wheel-rail interaction by using a coupling strategy

Effect of Mechanical Properties of Rail and Wheel on Wear and Rolling Contact Fatigue

A mathematically-based study of the random wheel-rail contact irregularity by wheel out-of-roundness

Three-dimensional elastic–plastic stress analysis of wheel–rail cyclic rolling contact using finite element method

Improving the robustness of non-Hertzian wheel–rail contact model for railway vehicle dynamics simulation

Non-Hertzian contact analysis of heavy-haul locomotive wheel/rail dynamic interactions under changeable friction conditions

Influence of viscoelastic mechanical properties of rail pads on wheel and corrugated rail rolling contact at high speeds

Characterization of the Microstructure Changes Induced by a Rolling Contact Bench Reproducing Wheel/Rail Contact on a Pearlitic Steel