Abstract:In ITER, pellets are calculated to require more than 8 times the mass than currently planned to reliably trigger ELMs. Unmitigated heat flux impulses from edge-localized modes (ELMs) are intolerable in ITER at full power and current. Therefore, ITER operation relies on multiple approaches to control ELM heat fluxes. One method is pellet ELM pacing to instigate small rapid ELMs with low heat flux. Predicting the performance of pellet pacing is critical for ITER, which is expected to operate in a regime with a low-collisionality, peeling-limited pedestal. However, to trigger ELMs the local pressure increase in the expanding pellet cloud pushes the equilibrium over the ballooning stability limit. In this work, linear and nonlinear M3D-C1 simulations are used to predict pellet mass thresholds in DIII-D discharges and ITER scenarios with peeling-limited pedestals. It is found that the distance of the equilibrium's operational point from the ballooning branch of the pedestal stability boundary strongly changes thresholds. Linear M3D-C1 simulations find a strong dependence of the pellet mass threshold on the poloidal injection location for ITER's 15 MA, Q=10 scenario. The required pellet mass at the planned injection locations is 8 to 17 times larger than currently considered. However, such linear simulations do not include pellet ablation physics or time evolution of density and temperature. A new scheme of 2D nonlinear simulations, coupled with linear stability analysis at various steps throughout the nonlinear time evolution, was developed to include such physics and improve on the linear results. These new nonlinear-to-linear simulations confirm previous findings. This result suggests that pellet ELM triggering in ITER could require pellets much larger than those currently planned, which makes ELM-pacing operationally challenging. On the other hand, fueling pellets injected from the high-field side will likely not unintentionally trigger ELMs in an otherwise ELM-stable plasma.

Proposal of a control scheme for testing a centrifuge-based pellet injection system in DIPAK-PET

Matter injection technology for DEMO, state of the art

Development of a precise size-controllable pellet injector for the detailed studies of ablation phenamena and mechanism

Plasma Shutdown System for Fusion Experimental Reactors

Optimization of pellet design parameters to achieve deep fueling depth in EAST plasma with PAM code

Modifications to the JET Shattered Pellet Injector to Optimize Disruption Mitigation Experiments for Supporting ITER’s DMS Design

Application of Near-Infrared Spectroscopy Combined with Design of Experiments for Process Development of the Pulsed Spray Fluid Bed Granulation Process

Fuelling of deuterium-tritium plasma by peripheral pellets in JET experiments

Design of the shattered pellet injection system for ASDEX Upgrade

Design of PLC and EPICS Based Control System for a Deuteron RFQ

Characteristic Research of Pellet Injection System in KSTAR

Design of a Shattered Pellet Injector and Preliminary Bench Tests of Ne Pellet Formation for EAST Disruption Mitigation

Simulation study of deuterium pellet ablation and deposition in the EAST tokamak with HPI2 code

Impact of breech geometry and propellant flow on the release of large pellets for the ITER disruption mitigation system

RF Helicon-based Inductive Plasma Thruster (IPT) Design for an Atmosphere-Breathing Electric Propulsion system (ABEP)

Design considerations for a pulse line ion accelerator (PLIA)-based PET isotope generator

Prediction of pellet mass thresholds for ELM triggering in low-collisionality, ITER-like discharges

Micro-particle injection experiments in ADITYA-U tokamak using an inductively driven pellet injector

Issues in Formation of Cryogenic Pellets for Fusion Applications

Optimal design and experimental testing of EMPI system for plasma disruption mitigation on J-TEXT

Shattered pellet injection technology design and characterization for disruption mitigation experiments