A 2.77-dB NF K-Band Four-Element Dual-Beam Phased-Array Receiver With 39-dB Tx-Band Rejection for SATCOM Applications
Jiaxing Sun,Shi Chao Jin,Zhuoheng Xie,Yuqian Yang,Bo Huang,Dunge Liu,Chenyu Mei,Jinhuai Su,Jun Huang,Xiulong Wu
DOI: https://doi.org/10.1109/tcsii.2024.3358744
2024-01-01
Abstract:This paper presents a K-band four-element dual-beam phased-array receiver in 65-nm CMOS SOI to enhance the Tx-band rejection for low-earth-orbit satellite communication (SATCOM) applications. By properly designing the inter-stage and output matching networks of the four-stage low-noise amplifier (LNA), the Tx-band rejection of the receiver can be effectively enhanced to fulfill the practical requirements of more than 35 dB. Meanwhile, considering the influence of the parasitic parameters of the LNA during practical design, the input matching network is properly designed to meet the impedance conditions of noise figure (NF) lower than 2.77 dB across the entire working frequency. Additionally, in response to the requirements for accurate phase shifts in phased-array systems, an active vector-modulated phase shifter is designed. Based on the proposed method, a K-band four-element dual-beam phased-array receiver operating from 17.7 to 21.2 GHz is designed and measured. The measurement results show the Tx-band rejection is greater than 39 dB, the single-channel gain is 21.48-25.31 dB, and the noise figure is 2.42-2.77 dB over the entire working frequency. Meanwhile, the measured root mean square (RMS) gain error and RMS phase error are less than 0.43 dB and 3.8∘, respectively.
engineering, electrical & electronic