Abstract:A common steel frame is installed at the bottom of a prefabricated equipment cabin (PEC) in modular cabin-type substations to create ample space for equipment routing and maintenance. This paper proposes an earthquake-resilient steel frame instead of the common one, which uses replaceable buckling-restrained cover plates (BRCPs) to dissipate energy and disc spring bolts (DSBs) to provide restoring force. Two PECs with the common frame and the resilient frame were designed and produced, called the seismic model and baseline resilient model respectively. Two natural ground motions were selected, and the two models were tested at three earthquake levels. Then, one replacement resilient model and three parametric resilient models were loaded under maximum considered earthquakes. The test results showed that the acceleration amplification factor of the top of the two frames ranged between 1.17 and 2.09, indicating that the bottom frames amplified the acceleration of the PECs. The resilient frame proposed in this paper significantly reduced the acceleration amplification factor of the cabin roof relative to the cabin bottom. It should be noted that the equipment acceleration was greater than that of the prefabricated cabin, and the equipment acceleration in the resilient models was slightly greater than that in the seismic model, implying that further research is needed to control the response of equipment inside the prefabricated cabin. The resilient frame can guide structural damage to the replaceable core plate, without residual deformation after earthquakes, and has good rapid recovery after earthquakes. Reducing the preload of DSBs can effectively enhance the acceleration control effect of the structure while removing the core plate of the beam-column joint or column foot joint has less impact.

Evaluating the applicability of seismic retrofit of an electric cabinet in a power plant

Shaking table and pseudodynamic tests for the evaluation of the seismic performance of base-isolated structures

Evaluation of seismic response of server cabinets through shaking table tests

Simplified Approach for Seismic Risk Assessment of Cabinet Facility in Nuclear Power Plants Based on Cumulative Absolute Velocity

An efficient numerical modeling approach for coupled electrical cabinets in nuclear power plants

Seismic Vulnerability of Cabinet Facility with Tuned Mass Dampers Subjected to High- and Low-Frequency Earthquakes

Experimental Study on the Acceleration Amplification Ratio of Cable Terminations for Electric Power Facilities

Seismic retrofit design and risk assessment of an irregular thermal power plant building

A Development of Seismic Fragility Curve of Box-Type Squat Shear Walls Using Data-Driven Surrogate Model Techniques

A heuristic method to identify optimum seismic retrofit strategies for critical infrastructure systems

Seismic Fragility Analysis of Critical Facilities in Communication Base Station Based on Shaking Table Test

Shaking table test of prefabricated equipment cabins with a resilient steel frame at the bottom

The application research of a main machine hall for a thermal power plant with BRB

Experimental evaluation of seismic performance of a hybrid walled-frame system in thermal power plants

A Maximum-Entropy-based Multivariate Seismic Vulnerability Analysis Method for Power Facilities: A Case Study on a ±1100-Kv Dry Type Smoothing Reactor

Shake Table Test and Finite Element Model for Evaluating Seismic Performance of 220?kv Transformer-Bushing Systems

Seismic Vulnerability Analysis of UHV Flat Wave Reactor Based on Probabilistic Seismic Demand Model

Shaking table testing of a reinforced concrete frame retrofitted with a steel oval member equipped with rubber cylinders

Seismic performance enhancement of high-voltage post insulators by a polyurethane spring isolation device

Elasto-plastic time-history analysis and shaking table test for a new energy-dissipation system of reticulated shell structure

A Systematic Method for Power System Hardening to Increase Resilience Against Earthquakes