Abstract:Herein, highly efficient Sn‐Pb PSCs are achieved by using green histidine (HIS) doped in PEDOT: PSS. HIS induces preferential crystal orientation of the perovskite films, reducing the residual strain. The modified device achieves a satisfactory 21.46% of PCE. Moreover, HIS neutralizes the acidity of PEDOT: PSS and passivates the perovskite defects, leading to significant enhancement in stability. Mixed tin‐lead perovskite solar cells (PSCs) have garnered much attention for their ideal bandgap and high environmental research value. However, poly (3,4‐ethylenedioxythiophene): poly (styrene sulfonate) (PEDOT: PSS), widely used as a hole transport layer (HTL) for Sn‐Pb PSCs, results in unsatisfactory power conversion efficiency (PCE) and long‐term stability of PSCs due to its acidity and moisture absorption. A synergistic strategy by incorporating histidine (HIS) into the PEDOT: PSS HTL is applied to simultaneously regulate the nucleation and crystallization of perovskite (PVK). HIS neutralizes the acidity of PEDOT: PSS and enhances conductivity. Especially, the coordination of the C═N and ‐COO− functional groups in the HIS molecule with Sn2+ and Pb2+ induces vertical growth of PVK film, resulting in the release of residual surface stress. Additionally, this strategy also optimizes the energy level alignment between the perovskite layer and the HTL, which improves charge extraction and transport. With these cooperative effects, the PCE of Sn‐Pb PSCs reaches 21.46% (1 sun, AM1.5), maintaining excellent stability under a nitrogen atmosphere. Hence, the buried interface approach exhibits the potential for achieving high‐performance and stable Sn‐Pb PSCs.

Fabrication of ultrathin PEG-modified PEDOT:PSS HTL for high-efficiency Sn-Pb perovskite solar cells by eco-friendly solvent etching technique

Enhancing Electron Extraction and Transport in Inorganic Perovskite Solar Cells Via Additional Built-in Potential of SnO2-BiFeO3 Nano-Heterostructure

A Newly Crosslinked‐double Network PEDOT:PSS@PEGDMA toward Highly‐Efficient and Stable Tin‐Lead Perovskite Solar Cells

Simultaneously Enhancing the Efficiency and Stability of Perovskite Solar Cells by Using P3HT/PEDOT:PSS as a Double Hole Transport Layer

Custom-tailored hole transport layer using oxalic acid for high-quality tin-lead perovskites and efficient all-perovskite tandems

Multi‐Functional Silole Hole Transport Layer for Efficient and Stable Lead–Tin Perovskite and Tandem Solar Cells

Conductive chelating agent treating electron transfer layer for environment-friendly and efficient perovskite solar cells

Tuning the Phase Separation of PEDOT:PSS Affords Efficient Lead-Free Perovskite Solar Cells

Targeted passivation and optimized interfacial carrier dynamics improving the efficiency and stability of hole transport layer-free narrow-bandgap perovskite solar cells

Tailored PEDOT:PSS hole transport layer for higher performance in perovskite solar cells: Enhancement of electrical and optical properties with improved morphology

Hydroxyl‐Rich d ‐Sorbitol to Address Transport Layer/Perovskite Interfacial Issues toward Highly Efficient and Stable 2D/3D Tin‐Based Perovskite Solar Cells

High efficiency of 19% for stable perovskite solar cells fabrication under ambient environment using “conductive polymer adhesive”

Understanding the Mechanism of PEDOT: PSS Modification Via Solvent on the Morphology of Perovskite Films for Efficient Solar Cells

Tin‐Lead Perovskite Solar Cells with Preferred Crystal Orientation by Buried Interface Approach

Natural Chelating Agent-Treated Electron Transfer Layer for Friendly Environmental and Efficient Perovskite Solar Cells

Polyelectrolyte-Doped SnO<sub>2</sub> as a Tunable Electron Transport Layer for High-Efficiency and Stable Perovskite Solar Cells

Improving the Performance of Perovskite Solar Cells with Sodium Stearate-Doped PEDOT:PSS as a Hole Transport Layer

Buried Interface Passivation of Sn‐Pb Narrow‐Bandgap Perovskite for Highly Efficient All‐Perovskite Tandem Solar Cells

Involving Hydroxyl-Rich d -Glucamine to Address Hole Extraction Interfacial Issues toward Efficient and Stable Tin-Based Perovskite Solar Cells

Ethyl Thioglycolate Assisted Multifunctional Surface Modulation for Efficient and Stable Inverted Perovskite Solar Cells

Functional Polymer Passivating FA 0.85 PEA 0.15 SnI 3 for Efficient and Stable Lead-Free Perovskite Solar Cells