Abstract:The theory of the transistor‐based class‐F−1 rectifier with the input second harmonic component is explored. A broadband high‐efficiency class‐F−1 rectifier (operating in 1.6–2.6 GHz) using a GaN transistor is realized. Measurements indicate a rectification efficiency of between 72.1% and 82.4% under the condition of Rdc = 67 Ω and Pin = 40 dBm. This brief proposes an innovational method to design a broadband high‐efficiency transistor‐based rectifier with high rectification efficiency. The theory of the class‐F−1 rectifier with the input second harmonic component is explored. Moreover, the mathematical variations of rectification efficiency and load/source impedances versus several crucial design parameters are established. The variation relationships indicate that the rectification efficiency can roughly maintain constant across a large input second harmonic range, resulting in more available design impedances. Thus, this provides the possibility to design wideband rectifiers. For validation, a broadband high‐efficiency class‐F−1 rectifier (operating in 1.6–2.6 GHz) using a GaN transistor is designed, assembled, and measured. Measurements indicate a rectification efficiency of between 72.1% and 82.4% under the condition of Rdc = 67 Ω and Pin = 40 dBm. The realized rectifier exhibits the largest relative bandwidth compared with transistor‐based rectifiers reported before. The methodology presented in this brief provides a promising approach for broadband high‐efficiency GaN HEMT‐based rectifiers.

A High-Efficiency Self-Synchronous RF-DC Rectifier With a Fixed Broadband Phase Offset

A GaN HEMTs Half-Bridge Driver with Bandgap Reference Comparator Clamping for High-Frequency DC-DC Converter.

A GaN-based MHz Active Clamp Flyback Converter with Adaptive Dual Edge Dead Time Modulation for AC-DC Adapters.

A High-Efficiency Self-Synchronous RF–DC Rectifier Based on Time-Reversal Duality for Wireless Power Transfer Applications

Design Method of Self-driving RF-DC Rectifier Based on Waveform-guided Solutions to Passive Matching Network

Waveform-Based Design of a 2.8-Ghz Self Synchronous Class-E RF-DC Rectifier with GaN Transistor

A Broadband High-Efficiency Quasi Class E Internally-matched GaN Power Amplifier with a Compact Band-Pass Output Matching Structure

Design of a transistor‐based broadband high‐efficiency class‐F−1 rectifier

A Compact Ultra-Broadband RF Rectifier Using Dickson Charge Pump

Design of a Self-Driving Transistor-Based RF-DC Converter Based on Optimized Harmonic-Tuned Rectification Waveforms

A Compact High-Efficiency RF Rectifier With Widen Bandwidth

Compact Broadband Rectifier with Wide Input Power Range Based on Adaptive Input Power Distribution

2.4 GHz GaN HEMT Class-F Synchronous Rectifier Using an Independent Second Harmonic Tuning Circuit

High-Efficiency and High-Power Rectifiers Using Cost-Effective AlGaN/GaN Schottky Diode with Accurate Large-Signal Parameter Extraction

Design of high efficiency rectifier operating at 2.4 GHz

A Broadband High-Efficiency RF Rectifier for Ambient RF Energy Harvesting

A Compact Broadband Rectifier Based on Coupled Transmission Line for Wireless Power Transfer

A compact broadband RF rectifier using two‐stage microstrip lines

A VHF Wide-Input Range CMOS Passive Rectifier With Active Bias Tuning

Dual-Module Ultrawide Dynamic-Range High-Power Rectifier for WPT Systems

A Single-Stage Four-Phase Dual-Output Regulating Rectifier with Ultrafast Transient Response Using Double-Frequency Current-Wave Modulation