Abstract:BackgroundThe electron beams produced by laser plasma acceleration have excellent quality for pulse lengths of the order of fs. Due to the existence of a strong laser field, there are difficulties in direct applications, and more applications need to transmit the electron beams to the application terminal. The energy spread leads to the generation of energy chirp of the electron beam in the transmission.PurposeThis study aims to explore the design of the beam optics to compress the pulse length and keep it on the fs scale.MethodsAn achromatic beamline consisting of bending magnets and quadrupole magnets was designed to compress the pulse length of electron beams. Critical parameters of an achromatic beamline were given by a derived formula. Transformation matrix was employed to investigate the differences of the pulse lengths in achromatic transmission and non-achromatic transmission. The pulse lengths of electron beams with different energies were scanned with different deflection angles (0.3 rad, 0.6 rad, 0.9 rad) and deflection radii (0.15 m, 0.25 m, 0.35 m) to study the influence of beamline parameters. Finally, the magnetic field gradients of the quadrupole lens were adjusted to realize the compression of electron beams with different energies in a beamline.ResultsComparing to non-achromatic transmission, the pulse lengths of electrons with the same energy and different initial divergence angles can be compressed effectively in the achromatic beamline. The larger the deflection angle or the deflection radius, the longer the pulse duration of the electron beam with higher energy (>25 MeV). By adjusting the magnetic field gradients of the quadrupole lens, the pulse lengths can be reduced from more than 100 fs to around 20 fs at higher energies.ConclusionsUsing a fixed-size achromatic beamline, combined with magnetic field strength adjustment, the pulse lengths of electron beams with different energies can be kept on the order of fs after transmission.

Optimizing the beam quality of high-energy pulse mid-IR Fe:ZnSe laser

Method to Improve Beam Quality by Compensating Spherical Aberrations in Master Oscillator Power Amplifier Laser Systems

Enhancing the performance of fluorescence emission difference microscopy using beam modulation

Pulse high energy Fe: ZnSe laser pumped by Q-switched Er: YAG laser

High average power (105 W) Fe:ZnSe laser pumped by radiation of laser diode side-pumped Er:YAG lasers

Theoretical characteristics of mid-infrared gain switched pulsed iron-doped ZnSe laser

The Performance of Seeded Free-Electron Lasers Through Dispersion Strength Tuning

Compact highly efficient 2.1-W continuous-wave mid-IR Fe:ZnSe coherent source pumped by Er:ZBLAN fiber laser

Study of achromatic beamline design for laser-driven femtosecond electron beams

Simulation analyses and configuration optimizations of an LD pumped 3.1 μm Co/Er:PbF 2 MIR laser

Enhanced beam quality of high-energy lasers utilizing fused silica as an all-solid-state SBS-PCM

Multi-beam Pump Mid-Infrared Laser

Optimization of Pump Pulse Duration and Cr:ZnSe Crystal Length for Efficient Generation of Tunable Mid-IR Laser Radiation Pumped by Laser Diode at Room Temperature

Design of RF Chopper System for Improving Beam Quality in FEL Injector with Thermionic Gun

Pump quantum efficiency optimization of 3.5 μm Er-doped ZBLAN fiber laser for high-power operation

Study of the Radiation Field from a Hollow Electron Beam Inside an Infrared Free Electron Laser Oscillator

Beam optimization of RFQ and SFRFQ combined accelerator at Peking University

Optimal Design of High Energy Similariton Thulium-Doped Fiber Lasers

Zinc Sulfide Optics for High Power Laser Applications

Optimization and demonstration of 6 kW oscillating-amplifying integrated fiber laser employing spindle-shaped fiber to suppress SRS and TMI

Potential continuous zooming scheme based on high-power broadband laser