Abstract:Mode-locked mid-infrared (mid-IR) fiber lasers are of increasing interest due to their many potential applications in spectroscopic sensors, infrared countermeasures, laser surgery, and high-efficiency pump sources for nonlinear wavelength convertors. Er3+-doped ZBLAN (ZrF4-BaF2-LaF3-AlF3-NaF) fiber lasers, which can emit mid-IR light at 2.65-2.9 mu m through the transition from the upper energy level I-4(11/2) to the lower laser level I-4(13/2), have attracted much attention because of their broad emission range, high optical efficiency, and the ready availability of diode pump lasers at the two absorption peaks of Er3+ ions (975 nm and 976 nm). In recent years, significant progress on high power Er3+-doped ZBLAN fiber lasers has been achieved and over 20 watt cw output at 2.8 mu m has been demonstrated; however, there has been little progress on ultrafast mid-IR ZBLAN fiber lasers to date. We report a passively mode-locked Er3+-doped ZBLAN fiber laser in which a Fe2+:ZnSe crystal was used as the intracavity saturable absorber. Fe2+:ZnSe is an ideal material for mid-IR laser pulse generation because of its large saturable absorption cross-section and small saturation energy along with the excellent opto-mechanical (damage threshold similar to 2 J/cm(2)) and physical characteristics of the crystalline ZnSe host. A 1.6 m double-clad 8 mol% Er3+-doped ZBLAN fiber was used in our experiment. The fiber core has a diameter of 15 mu m and a numerical aperture (NA) of 0.1. The inner circular cladding has a diameter of 125 mu m and an NA of 0.5. Both continuous-wave and Q-switched mode-locking pulses at 2.8 mu m were obtained. Continuous-wave mode locking operation with a pulse duration of 19 ps and an average power of 51 mW were achieved when a collimated beam traversed the Fe2+:ZnSe crystal. When the cavity was modified to provide a focused beam at the Fe2+:ZnSe crystal, Q-switched mode-locked operation with a pulse duration of 60 ps and an average power of 4.6 mW was achieved. More powerful and narrower pulses are expected if the dispersion of the cavity can be properly managed.

Compact highly efficient 2.1-W continuous-wave mid-IR Fe:ZnSe coherent source pumped by Er:ZBLAN fiber laser

Picosecond Passively Mode-Locked Mid-Infrared Fiber Laser

Multi-octave infrared femtosecond continuum generation in Cr:ZnS-GaSe and Cr:ZnS-ZGP tandems

Fe:ZnSe Laser Pumped by a 2.93- Μ M Cr, Er:YAG Laser*

1 Khz Nanosecond-Pulsed Room Temperature Fe:ZnSe Laser Gain-Switched by a ZnGeP2 Optical Parametric Oscillator

Er3+-doped ZBLAN Fiber Laser Q-switched by Fe:ZnSe

Compact hybrid laser based on semiconductor nanowires and a silica biconical fiber

Compact and efficient high-power mid-infrared supercontinuum fiber laser source based on a noise-like pulse and germania fiber

Passively Q-switched 2.8-μm nanosecond fiber laser

A Room Temperature Operation Mid-Ir Fe:ZnSe Laser Pumped by Ho,Pr:LiLuF4 Laser at 2.9-Μm

2 Mu M Femtosecond Fiber Laser Source And Its Application For Mid-Ir Supercontinuum Generation

Tunable Fe^2+:ZnSe Passively Q-switched Ho^3+-doped ZBLAN Fiber Laser Around 3 Μm

High-power continuous-wave mid-infrared 2.8 μm Er-doped fiber lasers: A review

A Gain-Switched Fe:ZnSe Laser Pumped by a Pulsed Ho,Pr:LLF Laser

Towards High-Power Densely Step-Tunable Mid-Infrared Fiber Source From 4.27 to 4.43 μm in CO_2-Filled Anti-Resonant Hollow-Core Silica Fibers

165 MHz highly stable femtosecond Er:ZBLAN fiber laser operating at 2.8 µm

165?MHz highly stable femtosecond Er:ZBLAN fiber laser operating at 2.8?μm

Compact and Tunable Mid-IR Light Source Based on a Dual-Wavelength Fiber Laser

High-Power Solid-State Near- and Mid-IR Ultrafast Laser Sources for Strong-Field Science

An Efficient Compact 300 Mw Narrow-Linewidth Single Frequency Fiber Laser at 15 Μm

Mid-infrared ultrashort pulses generated from a hybrid mode-locked Er:ZBLAN fiber laser