Abstract:3.4 μm mid-infrared pulse train laser is the characteristic spectral line of absorption peaks of CH4, NO2 and other molecules. Its pulse train working mode can increase the signal-to-noise ratio of laser detection echo signal. It has broad application prospects in radar detection, environmental monitoring, spectral analysis and other fields, which has aroused great interest of scientists. Compared with the traditional intra-cavity control method, the step Q-switching method has the advantages of simple structure, high energy utilization rate and accurate control. Therefore, in this paper, the theoretical and experimental study of a 3.4μm mid-infrared pulse train laser pumped by a step-type acousto-optic Q-switched external cavity in MgO:PPLN optical parametric oscillator is carried out. The theoretical model of fundamental frequency step acousto-optic Q-switching is established. The change trend of photon number density at different step intervals is simulated. The optimal trigger time of step signal required for step acousto-optic Q-switching is obtained. The possibility of obtaining pulse train laser output by step acousto-optic Q-switching is determined. In the simulation, the single pulse envelope contains 3 sub-pulse train waveforms. The pulse width of the sub-pulse in the pulse envelope gradually increases, the sub-pulse interval is 5 μs, and the pulse envelope repetition frequency is 20 kHz. At the same time, the optimal trigger time for the step signal was obtained to be 16.00 μs, 21.00 μs, 26.00 μs, 50.00 μs. The mid-infrared pulse train laser experiment of step acousto-optic Q-switched external cavity pumped MgO:PPLN optical parametric oscillator is carried out, and the 3.4 μm mid-infrared pulse train laser output containing three sub-pulses in a single pulse envelope was obtained. The sub-pulse interval is 5 μs, the narrowest pulse width is 12.8 ns, and the pulse envelope repetition frequency is 20 kHz, when the maximum average output power is 1.08 W, the maximum optical-to-optical conversion efficiency of 1064 nm fundamental light and 3.4 μm parametric light is 10.05 %, and the beam quality factor M2 is 2.01. The output position of the sub pulses during each repetition period in the experiment is basically consistent with the theoretical simulation, and it is found in both theory and experiment that the width of the sub pulses within each pulse envelope gradually increases. The experimental results show that 3.4 μm mid-infrared pulse train laser output can be obtained by using step AOQS combined with OPO. This innovative approach establishes a novel avenue for mid-infrared pulsed train laser generation, offering both theoretical underpinning and technological facilitation for the quantification of atmospheric pollutants' concentrations.

Multi-beam Pump Mid-Infrared Laser

Efficient parametric conversion for high power mid-infrared laser output

High Repetition Rate, 4 Μm Mid-Infrared Generation with Periodically Poled Magnesium-Oxide-Doped Lithium Niobate Based Optical Parametric Oscillator Pumped by Fiber Laser

Amplification Assisted Optical Parametric Oscillator in the Mid-Infrared Region

High Efficiency High Beam Quality 1064 Nm and 532 Nm Dual-Wavelength Laser Switched by a Quartz Crystal

Fiber Laser Pumped High Power Mid-Infrared Laser with Picosecond Pulse Bunch Output

Mid-infrared laser with 1.2 W output power based on PPLT

Ld Pumped High Power Laser System

Fiber Laser-Pumped, Chirped, PPMgLN-based High Efficient Broadband Mid-Ir Generation

LD pumped combined crystal Cr4+:YAG-Nd3+:YAG self Q-switched laser

3.4 μm mid-infrared pulse train laser based on stepped acousto-optic Q-switched external cavity pumped MgO:PPLN optical parametric oscillator

1.5 μm passively Q-switched self frequency conversion optical parametric oscillator based on Nd3+ doped MgO:PPLN with the multi-focus end-face coupling pumping mode

LD Pumped Combined Single Crystal Cr4+∶YAG -Nd3+∶yag Self Q-switched Laser

High Power Efficient 3.81 $\mu{\rm M}$ Emission from a Fiber Laser Pumped Aperiodically Poled Cascaded Lithium Niobate

Quasi-linear polarized high-efficient diode-end-pumped actively Q-switched Nd:YAG/Nd:YVO4 laser

High-repetition-rate High-Beam-quality 43 W Ultraviolet Laser with Extra-Cavity Third Harmonic Generation

Fiber Laser Pumped OPO for High Power Mid-Ir Laser Output

Study on π-polarized 1084 nm CW laser based on Nd3+ doped MgO:LiNbO3 with the end-face double-focus coupling pumping mode

PPMgLN-based high power OPO pumped by double end pumped Nd:YVO4 laser

Experimental Study of Solid - State Laser Multi - Direction Pumped by LD

High Power Diode-Side-Pumped 1 112-Nm Nd:Yag Laser Based on Master-Oscillator Power-Amplifier System