Abstract:In recent years, femtosecond (fs)-lasers have evolved into a versatile tool for high precision micromachining of transparent materials because nonlinear absorption in the focus can result in refractive index modifications or material disruptions. However, when high pulse energies or low numerical apertures are required, nonlinear side effects such as self-focusing, filamentation or white light generation can decrease the modification quality. In this paper, we apply simultaneous spatial and temporal focusing (SSTF) to overcome these limitations. The main advantage of SSTF is that the ultrashort pulse is only formed at the focal plane, thereby confining the intensity distribution strongly to the focal volume and suppressing detrimental nonlinear side effects. Thus, we investigate the optical breakdown within a water cell by pump-probe shadowgraphy, comparing conventional focusing and SSTF under equivalent focusing conditions. The plasma formation is well confined for low pulse energies <2 µJ, but higher pulse energies lead to the filamentation and break-up of the disruptions for conventional focusing, thereby decreasing the modification quality. In contrast, plasma induced by SSTF stays well confined to the focal plane, even for high pulse energies up to 8 µJ, preventing extended filaments, side branches or break-up of the disruptions. Furthermore, while conventional focusing leads to broadband supercontinuum generation, only marginal spectral broadening is observed using SSTF. These experimental findings are in excellent agreement with numerical simulations of the nonlinear pulse propagation and interaction processes. Therefore, SSTF appears to be a powerful tool to control the processing of transparent materials, e.g., for precise ophthalmic fs-surgery. Splitting an ultrashort pulse into its constituent colors prior to focusing can result in more precise and better-confined materials processing. Robert Kammel and co-workers used a grating to split a stream of 50 fs pulses from an amplified infrared mode-locked laser into spectrally separated beamlets. This beam was focused in a water cell using a parabolic mirror in order to confirm the effectiveness of the scheme for pulse energies of up to 8 µJ. Numerical simulations and experiments show that this approach strongly confines the intensity to the resulting focal spot and reduces unwanted nonlinear side effects such as self-focusing, filamentation and supercontinuum generation. The researchers say that their work should lead to improvements in the high-precision processing deep inside of transparent materials and could be particularly beneficial for ophthalmic fs surgery.

Zinc Sulfide Optics for High Power Laser Applications

ZnS Nanospheres for Optical Modulator in an Erbium‐Doped Fiber Laser

4H‐SiC Metalens: Mitigating Thermal Drift Effect in High‐Power Laser Irradiation

Post-processing ZnSe optical fibers with a micro-chemical vapor transport technique

Rapid fabrication of antireflective structures on ZnS surface by spatial shaping femtosecond laser

Enhancing Precision in Fs-Laser Material Processing by Simultaneous Spatial and Temporal Focusing

Femtosecond Laser Ablation for Manufacturing of X-ray Lenses and Phase Corrector Plates

A study of structural effects on the focusing and imaging performance of hard X‐rays with 20–30 nm zone plates

Fabrication of an Anti-Reflective Microstructure on ZnS by Femtosecond Laser Bessel Beams

ZnS fabricated by spark plasma sintering and its properties

Engineering Optical Materials Using Focused Ion Beams

Potential continuous zooming scheme based on high-power broadband laser

Enhanced beam quality of high-energy lasers utilizing fused silica as an all-solid-state SBS-PCM

Investigation of the thermal and optical performance of a spatial light modulator with high average power picosecond laser exposure for materials processing applications

Study on the Mechanism of Zns Anti - Reflecting Coating with High-Strength

High-Efficiency Spiral Zone Plates in Sapphire

Sapphire-Based Fresnel Zone Plate Fabricated by Femtosecond Laser Direct Writing and Wet Etching

Organic-inorganic composites for novel optical transformation induced by high-energy laser ablation

Nanosecond-laser annealing of zinc oxide thin-films: The effect of the laser wavelength and fluence

The Effect of ZnS/ZnO on the Formation, Luminescence and Optical Amplification of PbS Quantum Dots Doped Glasses

Investigation on the Machinability of Polycrystalline ZnS by Micro-Laser-Assisted Diamond Cutting