Abstract:Although the use of 3D printing in civil engineering has grown in popularity, one of the primary challenges associated with it is the absence of steel bars inside the printed mortar. As a result, developing 3D printing mortar with ultra-high compressive, flexural, and tensile strengths is critical. In the present study, an ultra-high-performance mortar incorporating silica fume (SF) and graphene nanoplatelets (GNPs) was developed for 3D printing application. The concrete mixture added SF to the concrete mixture in the range between 0% and 20%, while GNPs were added as a partial replacement by cement weight from 0.5% to 2%. The flowability and the machinal properties of the proposed mortar, including compressive (CS), tensile (TS), and flexural strength (FS), were investigated and assessed. Microstructure analysis involving FESEM and EDX was also investigated and evaluated, while response surface methodology (RSM) was considered to predict and optimize the optimum value of GNPs and SF. Workability results show that the flowability is reduced when the amount of graphene increases. Based on the predicted and experimental results, ultra-high-strength mortar can be developed by including 1.5% of GNPs and 20% of SF, in which the CS jumped from 70.7 MPa to 133.3 MPa at the age of 28 days. The FS and TS were 20.66 MPa and 14.67 MPa compared to the control mix (9.75 MPa and 6.36 MPa), respectively. This favorable outcome was credited to the pozzolanic activity of SF and the effectiveness of GNPs in compacting the pores and bridging the cracks at the nanoscale level, which were verified by FE-SEM and EDX. In addition, the developed quadratic equations proved their accuracy in predicting and optimizing the mechanical properties with low error (less than 0.09) and high correlation (R2 > 0.97). It can be concluded that the current work is an important step forward in developing a 3D printing mortar. The lack of reinforcement in the printed mortar structure has been a considerable difficulty, and the SF and GNPs have increased the compressive, flexural, and tensile strengths of the mortar. Thus, these improvements will encourage the industry to utilize sustainable materials to produce more affordable housing.

Cement Composites with Carbon‐based Nanomaterials for 3D Concrete Printing Applications – A Review

Advancements in 3D printing of cementitious materials: A review of mineral additives, properties, and systematic developments

Review of Advances in 3D Printing Technology of Cementitious Materials: Key Printing Parameters and Properties Characterization

Incorporating coarse aggregates into 3D concrete printing from mixture design and process control to structural behaviours and practical applications: a review

Micro/Nano additives in 3D printing concrete: Opportunities, challenges, and potential outlook in construction applications

Effect of supplementary cementitious materials on properties of 3D printed conventional and alkali-activated concrete: A review

An overview of recent advancements in fibre-reinforced 3D printing concrete

An Overview on the Rheology, Mechanical Properties, Durability, 3D Printing, and Microstructural Performance of Nanomaterials in Cementitious Composites

Recent Progress in Nanomaterials for Modern Concrete Infrastructure: Advantages and Challenges

Developments and Applications of Carbon Nanotube Reinforced Cement-Based Composites as Functional Building Materials

Sustainable and Renewable Bio-Based Natural Fibres and Its Application for 3D Printed Concrete: A Review

3D Printing Devices and Reinforcing Techniques for Extruded Cement-Based Materials: A Review

A review of 3D printed concrete: Performance requirements, testing measurements and mix design

State-of-the-art of 3D printing technology of cementitious material—An emerging technique for construction

The realities of additively manufactured concrete structures in practice

Review Paper on Investigating the Hardened Properties of Extrusion Based 3D Concrete Printing with Agro-Industrial Waste Materials

Sustainable materials for 3D concrete printing

Effect of Nanostructured Silica Additives on the Extrusion-Based 3D Concrete Printing Application

Modification effect of nanosilica and polypropylene fiber for extrusion-based 3D printing concrete: Printability and mechanical anisotropy

Development of Ultra-High-Performance Silica Fume-Based Mortar Incorporating Graphene Nanoplatelets for 3-Dimensional Concrete Printing Application

Aggregate-bed 3D concrete printing with cement paste binder