Experimental and theoretical study on seismic behavior of slab-wall joints in a new large-span slab-shear wall structural system

Ru-Rui Liu,Ran Ding,Meng Zhou,Ai-Zhi Wang,Lan-Ying Hu,Jian-Sheng Fan

DOI: https://doi.org/10.1016/j.istruc.2023.01.156

IF: 4.1

2023-02-12

Structures

Abstract:This paper proposes a new structural system named large-span slab-shear wall structure, which has prominent advantages in the architectural function and structural construction compared to the traditional shear wall structure. Due to the larger span and greater thickness of slabs, as well as the elimination of many beams and internal walls, the thick slab-shear wall joint becomes a key component in the new structure. This paper focuses on three typical types of thick slab-shear wall joints and conducts cyclic loading tests to reveal their seismic performance, including the exterior joints on the top floor (three l -shaped specimens), exterior joints on the intermedia floors (two T -shaped specimens), and interior joints on the top floor (two T -shaped specimens). Variables including the anchorage method of the slab bars and the reinforcement ratio of the walls are studied. Thereafter, based on the test results, a new calculation method for the joint strength of the slab-wall joints is proposed based on the strut-and-tie model from ACI318-19. The test results demonstrate that the proposed three types of slab-wall joints exhibit adequate strength and ductility under seismic loading despite the joint shear failure. The proposed simplified anchorage method can greatly reduce the congestion in the joint zone without weakening the seismic performance. The strut-and-tie model can provide an accurate prediction for the shear strength of the slab-wall joint zone.

engineering, civil