Research on seismic performance of precast steel–concrete composite tube shear walls with horizontal joint

Longji Dang,Rui Pang,Yuhao Liu,Yixiao Wang,Lu Wang,Jian Yang

DOI: https://doi.org/10.1016/j.engstruct.2021.113409

IF: 5.582

2022-01-01

Engineering Structures

Abstract:An innovative precast steel–concrete composite tube (SCCT) shear wall with horizontal joints is proposed, in which the horizontal joints are arranged in the middle of shear walls, the thin-walled steel tube, piercing bars and cover concrete provide restraint for the concrete inside the tube to improve the strength and deformation capacity of internal concrete, and the internal and outer concrete, piercing bars are used to avoid the out-of-plane deformation of the thin-walled steel tube. The experimental program was conducted on five full scale models of SCCT shear walls and one cast-in-situ RC shear wall (SW) subjected to cyclic loading. The results revealed that the precast SCCT shear walls with horizontal joints had high strength, stiffness, ductility and energy dissipation, verifying the reliability of the horizontal joints. Moreover, the horizontal joints had little impact on the overall seismic performance of the SCCT shear walls. In addition, two types of failure modes were observed in the SCCT shear walls, where type A was the ideal failure mode making full use of the steel materials and type B with the characteristics of brittle failure should be avoided. Based on the test results, an analytical model was established to calculate the normal section bearing capacity of the SCCT shear walls, and the proposed model was validated using the test results. Finally, finite element analysis (FEA) models of specimens were proposed based on a multilayer shell element, and a parameter study based on the proposed FEA model was conducted to investigate the influence of critical parameters on the mechanical performance of the SCCT shear walls.

engineering, civil