Abstract:The widespread use of 2024-T351 and 7075-T651 aluminum alloys in protective engineering highlights the critical need for investigation of their ballistic resistance. In this study, the ballistic resistance of monolithic 7075-T651 and 2024-T351 aluminum alloy targets and heterogeneous double-layered 2024 + 7075 and 7075 + 2024 aluminum alloy targets struck by blunt projectiles was investigated both experimentally and numerically. Ballistic impact tests of these targets were carried out using a one-stage gas gun, and the initial versus residual velocities data sets were determined experimentally. It was found that the monolithic aluminum alloy targets, 2024-T351 and 7075-T651, were perforated by blunt projectiles through a combination of shear plugging and membrane stretching failure mechanisms. The double-layered targets, composed of 7075-T651 at the front and 2024-T351 at the rear, exhibited a 7.3% higher ballistic limit velocity than the reversed configuration. In parallel with the experiments, numerical simulations were carried out using ABAQUS/Explicit. The behavior of both 2024-T351 and 7075-T651 aluminum alloy targets was described using plasticity models complemented by fracture criteria. Specifically, the 2024-T351 targets were modeled using a modified Johnson–Cook plasticity model, paired with either the Lode-dependent modified Mohr–Coulomb fracture criterion or the Lode-independent modified Johnson–Cook fracture criterion. In contrast, the 7075-T651 targets were modeled using a Johnson–Cook plasticity model, accompanied by either the Lode-dependent Wen–Mahmoud fracture criterion or the Lode-independent Johnson–Cook fracture criterion. Numerical simulations showed that the incorporation of the normalized Lode angle into fracture criteria enhanced the accuracy of ballistic limit velocity and failure pattern predictions for both monolithic and double-layered targets. The main objective of the study was to reveal the necessity of incorporation the normalized Lode angle into a fracture criterion to provide better prediction of ballistic resistance of heterogeneous aluminum alloy double-layered targets with various configurations struck by blunt projectiles through finite element simulations.

Numerical Study on Single and Multi-Layered Concrete Target Against Steel Projectile Impact

Numerical Study on the Perforation of Steel Plates by Multiple Projectiles

Numerical study on craters and penetration of concrete slab by ogive-nose steel projectile

Mesoscale Equivalent Numerical Study of Ultra-High Performance Concrete Subjected to Projectile Impact

Numerical analysis of projectile penetration and perforation of plain and fiber reinforced concrete slabs

PENETRATION OF CONCRETE TARGETS USING A MODIFIED HOLMQUIST–JOHNSON–COOK MATERIAL MODEL

Ballistic Impact Resistance of Ultra-High-Performance Concrete (UHPC): A Comprehensive Experimental Investigation and Parametric Analysis

Numerical Simulation of Multifunctional Projectile Penetrating Reinforced Concrete Target Plate Based on Sensor Data Acquisition

Constitutive modelling of concrete material subjected to low-velocity projectile impact: insights into damage mechanism and target resistance

Three-dimensional numerical simulation of projectile penetration into concrete and steel fiber reinforced concrete

Experimental and 3D Mesoscopic Numerical Simulation Study of Kinetic Projectile Penetrating into Concrete

Effect of Shear Reinforcement and Steel Liner on Ballistic Resistance of Reinforced Concrete Targets under Flat and Hemisphere Nose Missile Impact

Numerical Study on Concrete Penetration/Perforation under High Velocity Impact by Ogive-Nose Steel Projectile

Resistance of composite target against combined effects of large caliber projectile penetration and successive charge explosion

Numerical Study on the Projectile Impact Resistance of Multi-Layer Sandwich Panels with Cellular Cores

Experimental and Numerical Study on the Ballistic Resistance of Heterogeneous Double-Layered Aluminum Alloy Targets Against Blunt Projectiles

A novel dynamic constitutive model for UHPC under projectile impact

A simulation approach for quantifying ballistic impact damage in ultra-high-performance concrete

Numerical Simulation Of High-Speed Projectile Oblique Penetration Into The Concrete Target

Comparative Study On Performance Of Uhtcc And Rpc Thick Panels Under Hard Projectile Impact Loading

Investigation on anti-penetration performance of reinforced concrete targets based on ANSYS/LS-DYNA