Abstract:To investigate the hypervelocity impact mechanism of a tungsten alloy projectile on a concrete target, a new dynamic plasticity-based failure model for metal was developed by introducing Lode angle, dynamic enhancement factor, temperature softening term and stress triaxiality, and a new constitutive model for concrete was proposed by introducing strain rate effect, pressure dependence, Lode angle and free water effect. The advanced measurement technologies were introduced to determine the dynamic mechanical behaviors of materials, then the materials parameters were used to numerically simulate the hypervelocity penetration of a tungsten alloy projectile into a concrete target. Based on a 57/10 two-stage light gas gun, the experiments were carried out on the hypervelocity impact of the tungsten alloy projectile on the concrete target. And according to the computed tomography scanning images of the damaged concrete targets, the crater characteristics in the targets were analyzed. Then the relationships of the total penetration depth and the residual length of the projectile with the initial impact velocity of the projectile were obtained. The penetration of the projectile and the stress wave propagation in the concrete target were analyzed by the theoretical method. The achieved results are as follows. (1) By utilizing the new constitutive models for the metal and concrete, the failure morphology of the concrete derived from numerical simulation is consistent with that from the experiment. (2) The craters are structured by spalling areas and projectile holes, the transverse failure effect shows a significant advantage over low-velocity penetration, and the volume of craters is approximately proportional to the kinetic energy of projectiles. (3) The penetration depth increases at first and then decreases with the increase of the impact velocities, the decrease of the penetration depth under high velocity is due to the decrease of the rigid penetration stage after the erosive penetration stage. (4) A theoretical penetration model is proposed, which can be used to predict the depth of penetration, the residual length of the projectile and the diameter of the mushroom-like head, et al. (5) A theoretical stress wave propagation model is developed and the theoretical results of stress waves are in good agreement with the experimental ones.

Constitutive modelling of concrete material subjected to low-velocity projectile impact: insights into damage mechanism and target resistance

Numerical studies on resistance of concrete target under rigid projectile impact using Perzyna-type visco-damage model

Penetration Behavior of Concrete Targets Subjected to Tungsten-Alloy Long-Rod Projectile Impact

Experimental and theoretical investigation of the failure behavior of a reinforced concrete target under high-energy penetration

Penetration Of Limited-Thickness Concrete Targets

Mechanism on Hypervelocity Penetration of a Tungsten Alloy Projectile into a Concrete Target

Rigid and Eroding Projectile Penetration into Concrete Targets Based on an Extended Dynamic Cavity Expansion Model

Experimental and 3D Mesoscopic Numerical Simulation Study of Kinetic Projectile Penetrating into Concrete

Experimental and theoretical study on steel long-rod projectile penetration into concrete targets with elevated impact velocities

Failure Mechanism of Reinforced Concrete Subjected to Projectile Impact Loading

Study on Behavior of Semi-Infinite Concrete Targets Subjected to Projectile Normal Penetration

Study on the Suitability of Concrete Constitutive Models for Perforation Simulation

Modelling damage mechanisms of concrete under high confinement pressure

Application of concrete damage evolution equation considering confining pressure and strain rate effects in projectile penetration

Numerical study on craters and penetration of concrete slab by ogive-nose steel projectile

Experimental research on the mechanism of a high-velocity projectile penetrating into a reinforced concrete target

Numerical Analysis on Impact Response of Ultra-High Strength Concrete Protected with Composite Materials Against Steel Ogive-Nosed Projectile Penetration

Numerical Prediction of Dynamic Failure in Concrete Targets Subjected to Projectile Impact by a Modified Kong-Fang Material Model

Experimental and Mesoscale Numerical Investigation on the Failure Behavior of Reinforced Concrete under Projectile-Impact Loading

Experimental and numerical study on projectiles' high-velocity penetration into reinforced concrete

Mesoscale Investigation on Failure Behavior of Reinforced Concrete Slab Subjected to Projectile Impact