Abstract:The adhesive strength and surface roughness of diamond films are the key factors to influence the cutting performance and tool life of diamond-coated tools. Compared with the sintered polycrystalline diamond, the deposited thin film diamond has the great advantage on the fabrication of cutting tools with complex geometries. Because of their low costs for fabrication equipment and high performance on high speed machining non-ferrous metals and alloys, metal-compound materials, and hard brittle non-metals, diamond-coated drills find great potentialities in the commercial application. However, the poor adhesion of the diamond film on the substrate becomes the main technical barriers for the successful development and commercialization of diamond-coated tools. In this paper, diamond thin films were deposited on WC-Co based drills by the electron aided hot filament chemical vapor deposition (EACVD). A new multiple chemical pretreatment technology including microwave oxidation, reaction in alkaline solution and cleaning by ultrasonic treatment in acid solution was developed and affects on the diamond adhesion strength, nucleation and surface morphology were investigated. At the same time, a special setup to fabricate diamond-coated drills was also developed and then the novel CV]D process based on the varied parameters controlling model was presented, therefore the uniform quality and homogenized thickness of diamond coating could be available. Composite diamond films were achieved by firstly depositing the rough polycrystalline diamond layers which had good adhesion, and then overlapping the smooth diamond layers with nanometer size grains which yielded very low roughness. From practical utilization viewpoint, the cutting performance of the diamond coated drill was studied by drilling SiC particle reinforced aluminum matrix composite. The satisfied wear resistance and decrease of torque and thrust lead to the long tool life of the diamond coated drills. This paper exhibits the meaningful work for the development of cutting tools with complex geometries and further extends application of diamond material.

Drilling of alumina and zirconia ceramics using diamond-coated carbide drill

Through-hole drilling characteristics of alumina ceramics using diamond-coated carbide drill

Development of Diamond-Coated Drills for High-Speed Machining SiC Particles Reinforced Aluminum-Matrix Composite

A New Strategy of Carbon Fiber Reinforced Plastic Drilling Evaluation Using Thermal Measurement

Comparative study of tool wear mechanisms in drilling ZrO2 ceramics using various tool types

Studies of Adhesion and Roughness of Diamond Coated Drills and Influence on Cutting Performance

Synthesis and Evaluation of High-Performance Diamond Films with Multilayer Structure on Printed Circuit Board Drills

Development of Diamond-Coated Drills and Their Cutting Performance

Fabrication and Drilling Tests of Chemical Vapor Deposition Diamond Coated Drills in Machining Carbon Fiber Reinforced Plastics

Deposition of Diamond Coatings on Ultrathin Microdrills for PCB Board Drilling

Fabrication and Cutting Performance of Ultrafine Grain Composite Diamond Coated Drills

Optimization of Diamond Coated Microdrills in Aluminum Alloy 7075 Machining: A Case Study

Fabrication and Cutting Performance of Micro- and Nano-crystalline Diamond Coated Spade Drills

Theoretical and Experimental Investigation on Inclined Ultrasonic Elliptical Vibration Cutting of Alumina Ceramics

Comparison of Chemical Vapor Deposition Diamond-, Diamond-Like Carbon- and TiAlN-coated Microdrills in Graphite Machining

Preparation and Drilling Characteristics of Diamond Coated Cemented Carbide Step Cutting Tool

Wear behavior and machining quality of novel high-sharp brazed diamond abrasive core drills during drilling SiCf/SiC composite micro-holes

Combined Influences of Tool Shape and As-Deposited Diamond Film on Cutting Performance of Drills for CFRP Machining

Wear behaviour of CVD diamond-coated tools in the drilling of woven CFRP composites

Research on the Influence of Alumina Ceramic Microstructure on Diamond Wire Sawing

Tribological Behavior and Cutting Performance of Monolayer, Bilayer and Multilayer Diamond Coated Milling Tools in Machining of Zirconia Ceramics