Abstract:A split Hopkinson pressure bar apparatus driven by a pendulum hammer was used to perform uniaxial compression tests to examine the degradation process of green sandstone subjected to repetitive impact loading. The acoustic characteristics, dissipated energy, deformation characteristics, and microstructure evolution were investigated. The representative stress–strain curve can be broken into five stages that were characterized by changes in the axial strain response during impact loading. Both the ultrasonic wave velocity and cumulative dissipated energy exhibited obvious three-stage behavior with respect to the impact number. As the impact number increased, more than one peak was observed in the frequency spectra, and the relative weight of the peak frequency increased in the low-frequency range. According to the evolution of the ultrasonic wave velocity, the degradation process was divided into three stages. By comparing the intact stage I and early stage II microcrack development patterns, the initiation of new cracks and elongation of existing cracks were identified as the main degradation mechanisms. Furthermore, a slight increase in the number of cracks was observed, and microcrack lengths steadily increased. Moreover, due to the low level of microcrack damage, the deformation mechanism was mainly characterized by volume compression during impact loading. In late stage II, the main degradation mechanism was the elongation of existing cracks. Additionally, as microcracks accumulated in the rock samples, cracks were arranged parallel to the loading direction, which led to volume dilation. In stage III, microcracks continued to elongate nearly parallel to the loading direction and then linked to each other, which led to intense degradation in the rock samples. In this stage, rock sample deformation was mainly characterized by volume dilation during impact loading. Finally, rock samples were split into blocks with fractures oriented subparallel to the loading direction. These results can improve the understanding of the stability evaluations of rock structures subjected to repetitive impact loading.

Evolution of stress-strain state in structured rock specimens under uniaxial loading

Study Of Microstructures Of Soft Clay Under Dynamic Loading Considering Effect Of Cyclic Stress Ratio And Frequency

Changes in the Stress–Strain States of Subsurface Layers of Steel During Loading

Micromechanics of Fracture Propagation During Multistage Stress Relaxation and Creep in Brittle Rocks

3D digital-image correlation insight into generalized relaxation behavior of sandstone under stress and pore pressure coupling

Rock fractures developed in the class II post-peak unloading

Experimental study on mechanical and acoustic emission characteristics of sedimentary sandstone under different loading rates

Effects of Acoustic Emission and Energy Evolution of Rock Specimens Under the Uniaxial Cyclic Loading and Unloading Compression

Deformation and hysteresis behaviors of sandstone exposed to distinct sequences of variable-frequency compressive cyclic stresses

Long-term creep and microscopic deformation mechanisms of sandstone using rock rheology creep equipment and scanning through high-resolution 3D XRM

Experimental Study of Shear Behavior of Rock Joints under Two Types of Boundary Conditions: Constant Normal Load and Constant Normal Stiffness

Effect of Unloading Rate on the Mechanical Behavior and Fracture Characteristics of Sandstones Under Complex Triaxial Stress Conditions

Post-Peak Stress–Strain Curves of Brittle Hard Rocks Under Different Loading Environment System Stiffness

Acoustic Emission Characteristics of Red Sandstone Specimens Under Uniaxial Cyclic Loading and Unloading Compression

Spatial-Temporal Heterogeneity in the Deformation and Damage of Rock Samples: Experimental Study Using Digital Image Correlation Analysis

Effect of loading rates on mechanical behavior and strain localization characteristics of sandstone

Stress Evolution of Rock-Like Specimens Containing a Single Fracture Under Uniaxial Loading: a Numerical Study Based on Particle Flow Code

Experimental and Numerical Investigation on the Dynamic Failure Envelope and Cracking Mechanism of Precompressed Rock under Compression-Shear Loads

Experimental investigations of the dynamic mechanical properties and fracturing behavior of cracked rocks under dynamic loading

Dynamic Characteristics of Green Sandstone Subjected to Repetitive Impact Loading: Phenomena and Mechanisms

Spatial Persistence of High Strain Events During Brittle Failure