Abstract:In the current study, a series of laboratory triaxial loading and unloading experiments were conducted for the purpose of comprehensively understanding the effects on sandstone of loading processes under axial stress conditions and unloading processes under confining pressure conditions. The mechanical properties and crack propagation behaviors of sandstone specimens were analyzed. In addition, a new damage variable based on crack evolution was proposed. The experimental results showed that the strain-softening modulus of the sandstone specimens under triaxial loading and unloading compression conditions decreased with the increases in the loading rate. Meanwhile, the elastic modulus was only observed to undergo small changes. This study found that with the increases in the loading rates of axial stress, the deformation and strength levels of the sandstone specimens also increased. In addition, the crack initiation stress showed a linear increasing trend with the increases in the loading rates of axial stress. The peak crack volumetric strain displayed a slight increase with the loading rate of axial stress, which indicated that the larger the loading rate of axial stress on the sandstone specimens was, the smaller crack propagation strain levels at the peak stress levels would be. The crack propagation velocities were observed to be larger when the loading rates of axial stress were higher. Also, at the same loading rate of axial stress, the crack propagation velocity corresponding to the peak stress of the volumetric cracks was the largest, followed by radial cracks. The crack propagation velocity of the axial cracks was determined to be the smallest. In this study, a new crack damage variable based on crack volumetric strain was proposed. According to the evolution of the crack damage variables of the sandstone specimens, the following four stages of the failure process were obtained: original damage stage; elastic stage; linear damage stage; and accelerated damage stage. The results obtained in this research study provided an important scientific basis for the support of future designs and safety protection measures in underground mining operations.

Effect of loading rates on mechanical behavior and strain localization characteristics of sandstone

Energy evolution and macro-micro failure mechanisms of frozen weakly cemented sandstone under uniaxial cyclic loading and unloading

Effect of Unloading Rate on the Mechanical Behavior and Fracture Characteristics of Sandstones Under Complex Triaxial Stress Conditions

Experimental study on mechanical and acoustic emission characteristics of sedimentary sandstone under different loading rates

Effect of Loading Rate on the Mechanical Properties of Weakly Cemented Sandstone

Effect of Loading Rate on Local Deformation of Rock-Like Models with Locked Segment

Mechanical properties and failure characteristics of sandstone under ramp loading paths

Mechanical properties of deep sandstones under loading rate effect

Effect of Loading Rate and Water on the Dynamic Fracture Behavior of Sandstone under Impact Loadings

Deformation and mechanical properties of rock: effect of hydromechanical coupling under unloading conditions

Effect of Triaxial Loading and Unloading on Crack Propagation and Damage Behaviors of Sandstone: An Experimental Study

Mechanical Behavior and Acoustic Emission Characteristics of Sandstone Under Different Cyclic Loading and Unloading Disturbance Rates

Strain rate effect on the fracture evolution of sandstones under quasi-static loading conditions: Insights from acoustic emission characteristics

Effects of length-to-diameter ratio and strain rate on strain energy accumulation and dissipation in sandstone

Influence of volume compression on the unloading deformation behavior of red sandstone under damage-controlled cyclic triaxial loading

Experimental investigation of the strain rate effect on crack initiation and crack damage thresholds of hard rock under quasi-static compression

The Influence of the Strain Rate and Prestatic Stress on the Dynamic Mechanical Properties of Sandstone—A Case Study from China

Experimental study on mechanical behavior and permeability evolution of weakly cemented sandstone under unloading conditions

Effect of stress amplitude on mechanical and acoustic emission of sandstone under constant–cyclic loading

Mechanical properties and energy evolution law of water bearing sandstone under cyclic loading

Study on the mechanical properties of unloading damaged sandstone under cyclic loading and unloading