Abstract:<p>Hollow porous fiber with both hollow and mesoporous structural characteristics can play an important role in storage, adsorption, and other fields. Triangular hollow porous fiber was prepared by coaxial wet spinning in this paper. Polyacrylonitrile (PAN) and N‐N dimethylformamide (DMF) were blended to get cortical solution. Polyvinylpyrrolidone (PVP) and DMF were blended to get core solution. Subsequently, coaxial triangular spinneret was adopted to inject solution into coagulation bath for double diffusion and obtain primary fiber. Then PAN‐based triangular fiber with high porosity was prepared after washing and drying. Scanning electron microscopy, nitrogen physical adsorption instrument, thermogravimetric analyzer, and other instruments were used to test and characterize. The results show that the cross‐section of the fiber is triangular and has a sense of luster. The hollow degree of the fiber is as high as 84.17%, and the sheath has three‐level structure with multi‐scale pore diameters, including micropores (200 μm), submicron pores (200 nm), and nanopores (20 nm). Through the range analysis of orthogonal experiment, it is found that the concentration of cortical solution is the main factor affecting the fiber tensile strength. When the concentration of cortical solution is 17%, the concentration of core solution is 10%, the flow rate ratio of cortical solution to core solution is 10:1, and the concentration of coagulation bath is 10%, the fiber tensile strength reaches 1.43 N/mm<sup>2</sup>. The thermal insulation performance of fiber is better than that of silk, cotton and polyester. The results in this paper will provide an experimental foundation for the design and application of hollow porous profiled fibers.</p>

FABRICATION OF PAN-BASED HOLLOW CARBON FIBERS BY COAXIAL ELECTROSPINNING AND TWO POST-TREATMENTS

Aqueous-Based Coaxial Electrospinning of Genetically Engineered Silk Elastin Core-Shell Nanofibers

Preparation of porous hollow polyacrylonitrile ultrafine fibers by coaxial electrospinning

Nanofibrous Mats of Rigid Polysaccharides Prepared by Coaxial Electrospinning

Preparation and characterization of triangular hollow porous polyacrylonitrile fiber made by coaxial wet spinning

Preparation of PAN@PU coaxial electrostatic spun nanofibers for oil/water separation

Control of physical properties of carbon nanofibers obtained from coaxial electrospinning of PMMA and PAN with adjustable inner/outer nozzle-ends

Method for preparing polyacrylonitrile-based porous hollow carbon fibers by coaxial electrospinning

PREPARATION OF POROUS POLYACRYLONITRILE ULTRATHIN FIBERS BY ELECTROSPINNING WITH NONSOLVENT INDUCED PHASE SEPARATION

Effect of the polyacrylonitrile mass fraction on the structure of coaxial polyacrylonitrile/mesophase pitch composite fibers

Using coaxial electrospinning to fabricate core/shell-structured polyacrylonitrile–polybenzoxazine fibers as nonfouling membranes

Preparation of porous polyacrylonitrile fibers by electrospinning a ternary system of PAN/DMF/H2O

Characterization Of Pan/Pani-Dbsa Blend Nanofibers Produced By Electrospinning Method

Preparation of Polyacrylonitrile and Polystyrene Blend Fibers Through Electrospinning

Coaxial Electrospinning and Characterization of Core-Shell Structured Cellulose Nanocrystal Reinforced PMMA/PAN Composite Fibers

Processing-Mechanical Property Relationship of Hollow and Porous Carbon Fibers Fabricated by Coaxial Electrospinning

Coaxial electrospun poly(methyl methacrylate)-polyacrylonitrile nanofibers: atomic force microscopy and compositional characterization.

The effects of electrospinning parameters on coaxial polyacrylonitrile/polyurethane nanofibers: Morphology and water vapour transmission rate

Nanoporous Structured Submicrometer Carbon Fibers Prepared Via Solution Electrospinning of Polymer Blends.

Enhancing mechanical strength of electrospun nanofibers by coaxial electrospinning and thermal treatment

Fabrication of double-tubular carbon nanofibers using quadruple coaxial electrospinning