Abstract:<p>Hollow porous fiber with both hollow and mesoporous structural characteristics can play an important role in storage, adsorption, and other fields. Triangular hollow porous fiber was prepared by coaxial wet spinning in this paper. Polyacrylonitrile (PAN) and N‐N dimethylformamide (DMF) were blended to get cortical solution. Polyvinylpyrrolidone (PVP) and DMF were blended to get core solution. Subsequently, coaxial triangular spinneret was adopted to inject solution into coagulation bath for double diffusion and obtain primary fiber. Then PAN‐based triangular fiber with high porosity was prepared after washing and drying. Scanning electron microscopy, nitrogen physical adsorption instrument, thermogravimetric analyzer, and other instruments were used to test and characterize. The results show that the cross‐section of the fiber is triangular and has a sense of luster. The hollow degree of the fiber is as high as 84.17%, and the sheath has three‐level structure with multi‐scale pore diameters, including micropores (200 μm), submicron pores (200 nm), and nanopores (20 nm). Through the range analysis of orthogonal experiment, it is found that the concentration of cortical solution is the main factor affecting the fiber tensile strength. When the concentration of cortical solution is 17%, the concentration of core solution is 10%, the flow rate ratio of cortical solution to core solution is 10:1, and the concentration of coagulation bath is 10%, the fiber tensile strength reaches 1.43 N/mm<sup>2</sup>. The thermal insulation performance of fiber is better than that of silk, cotton and polyester. The results in this paper will provide an experimental foundation for the design and application of hollow porous profiled fibers.</p>

Method for preparing polyacrylonitrile-based porous hollow carbon fibers by coaxial electrospinning

Preparation of porous hollow polyacrylonitrile ultrafine fibers by coaxial electrospinning

Preparation and characterization of triangular hollow porous polyacrylonitrile fiber made by coaxial wet spinning

Preparation of porous polyacrylonitrile fibers by electrospinning a ternary system of PAN/DMF/H2O

Preparation of Polyacrylonitrile and Polystyrene Blend Fibers Through Electrospinning

Nanoporous Structured Submicrometer Carbon Fibers Prepared Via Solution Electrospinning of Polymer Blends.

FABRICATION OF PAN-BASED HOLLOW CARBON FIBERS BY COAXIAL ELECTROSPINNING AND TWO POST-TREATMENTS

PREPARATION OF POROUS POLYACRYLONITRILE ULTRATHIN FIBERS BY ELECTROSPINNING WITH NONSOLVENT INDUCED PHASE SEPARATION

Preparation and Characterization of Highly Porous Polyacrylonitrile Electrospun Nanofibers Using Lignin as Soft Template via Selective Chemical Dissolution Technique

Porous carbon fiber, and preparation method and application thereof

Composition Design of Block Copolymers for Porous Carbon Fibers

Preparation of Polyacrylonitrile hollow carbon spheres and its application

Preparation of PAN@PU coaxial electrostatic spun nanofibers for oil/water separation

Nanofibrous Mats of Rigid Polysaccharides Prepared by Coaxial Electrospinning

Carbon Nanofibers Production via the Electrospinning Process

Using coaxial electrospinning to fabricate core/shell-structured polyacrylonitrile–polybenzoxazine fibers as nonfouling membranes

Structure and Morphological Evolvement of Electrospun Polyacrylonitrile/Organic–Modified Fe-Montmorillonite Composite Carbon Nanofibers

Carbon Dioxide Adsorption on Carbon Nanofibers with Different Porous Structures

Porous carbon fibers from gel-spun polyacrylonitrile and poly(methyl methacrylate)-block-poly(acrylonitrile)

Functionalization of Polyacrylonitrile-Based Electrospun Nanofibers

One kind of a large diameter high strength and high modulus PAN-based carbon fiber and its preparation method