Abstract:Epoxy resin nanocomposites are widely used in the field of electrical insulation packaging. It is of great significance to regulate the dielectric and insulation properties of composite materials by introducing nano-filler to meet special application requirements. This work proposes a chemical copolymerization method, fluorinated polystyrene nanospheres are synthesized through an addition reaction as filler, and finally the epoxy nanocomposites are prepared. The polystyrene nanospheres have a uniform size and good compatibility with the epoxy resin. The introducing of nanospheres reduces the dielectric constant of the epoxy resin composite material and increases the breakdown strength simultaneously. Although the dielectric loss increases, the composites' imaginary part remains below 0.04 within 1 MHz frequency. In particular, the fluorinated polystyrene/epoxy composite with a mass fraction of 2% exhibits a decrease in dielectric constant and DC conductivity, while the AC breakdown strength and DC breakdown strength increase by 12.6% and 6%, respectively. The results of the pulse electro-acoustic method indicate that the charge injection of the epoxy resin filled with non-fluorinated polystyrene nanospheres is evident, while the introduction of fluorinated nanospheres significantly reduces the charge injection level. Calculations based on the depolarization process reveal that the introduction of fillers leads to an increase in trap density and depth of energy levels in the composites. Notably, the epoxy resin filled with fluorinated fillers has the deepest trap levels, providing an explanation for the improved insulation breakdown performance. The research can provide guidance for regulating dielectric properties of epoxy composites and material synthesis for the application of electrical insulation packaging.

The low-k epoxy/cyanate nanocomposite modified with epoxy-based POSS: The effect of microstructure on dielectric properties

A research on benzoxazine/cyanate ester/epoxy POSS nanocomposite with low dielectric constant and improved toughness

Improving Insulation Properties of Epoxy Filled with Surface Fluorinated Polystyrene Nanospheres

Electrical properties of epoxy/POSS composites with homogeneous nanostructure

A Rational Design of Core-Shell-satellite Structured BaTiO3 Fillers for Epoxy-Based Composites with Enhanced Microwave Dielectric Constant and Low Loss

Enhanced Dielectric Properties and Thermal Stability of Epoxy Induced by Polyhedral Oligomeric Silsesquioxanes

The Recent Advances of Polymer-POSS Nanocomposites With Low Dielectric Constant

Tailoring Interfacial Crosslinking Sites to Improve the Dielectric Properties of Epoxy/poss Nanocomposites

Preparation of a Low Dielectric POSS/epoxy Hybrid Polymer Without Sacrificing the Mechanical Performance

Preparation of Low Dielectric POSS/Epoxy Hybrid Polymer without Sacrificing Mechanical Performance

Controllable confinement nano-reinforced organic-inorganic cyanate ester resin with optimal modulus and dielectric properties trade-offs

Molecular Dynamics Simulations of Key Physical Properties of Nanodielectrics Manufactured with Epoxy Resin Doped with C60, C70, and C60 Derivatives

Improvement of DC Breakdown Strength of the Epoxy/POSS Nanocomposite by Tailoring Interfacial Electron Trap Characteristics

Molecular simulation of nano polyhedral oligomeric silsesquioxane doping effect on the properties of two-component crosslinked epoxy resin

Polyhedral oligosilsesquioxane-modified boron nitride nanotube based epoxy nanocomposites: An ideal dielectric material with high thermal conductivity

Tailoring the cage and functionality of POSS for scalable low-dielectric and tough cyanate ester hybrid resin

Epoxy nanocomposites with octa(propylglycidyl ether) polyhedral oligomeric silsesquioxane

Dielectric Properties of Epoxy-Al2o3 Nanocomposites

Modulating cross-linked network structure of epoxy resin blends towards concurrently high intrinsic thermal conductivity and dielectric properties

Polyhedral Oligomeric Silsesquioxane Nanocomposites Exhibiting Ultra-Low Dielectric Constants Through Poss Orientation Into Lamellar Structures

Morphology and Thermomechanical Properties of Organic−Inorganic Hybrid Composites Involving Epoxy Resin and an Incompletely Condensed Polyhedral Oligomeric Silsesquioxane