On the application of acoustic liners for the reduction of jet-flap installation noise

José R.L.N. Sirotto,Lucas A. Bonomo,Julio A. Cordioli
DOI: https://doi.org/10.1016/j.apacoust.2024.110029
IF: 3.614
2024-04-19
Applied Acoustics
Abstract:In this work, an experimental and numerical analysis of the feasibility of using acoustic liners to reduce the acoustic far-field radiation of a subsonic jet near a flat plate is presented. The Boundary Element Method (BEM) with a wavepacket model of the jet noise and considering an acoustic impedance boundary condition was used to calculate the far-field noise for different conditions. A parametric optimization was performed in order to find an optimum impedance in terms of the Overall Sound Pressure Level reduction. Semi-empirical models of acoustic liners were then used to design a liner with an impedance as close as possible to the optimum impedance. The liners were built using additive manufacturing and tested in terms of their acoustic impedance and the resulting noise reduction when applied to a region of the flat plate. The BEM simulations, considering the impedance, showed good agreement with experimental data. Overall, by means of the BEM model, optimization and liner semi-empirical models, it was possible to design an acoustic liner which significantly reduced the installation noise at the far-field, with the overall noise reduction between 2 dB to 4 dB depending on observation angle.
acoustics
What problem does this paper attempt to address?