Abstract:The internal, low Mach number, turbulent flow-induced acoustic field of a cylindrical 90° pipe bend with a curvature radius Rm/D=1.02 is investigated using hybrid Computational Aero-Acoustics (CAA). Incompressible Large-Eddy Simulation (LES) is used to computationally describe the turbulent flow field at bulk Reynolds numbers ReB=5000,12000,26000 and 66000 . The incompressible LES predicts all salient flow features, like the separation from the inner wall of the bend followed by a turbulent recirculation zone, in good agreement with literature. The internal flow-induced noise is predicted by solving Acoustic Propagation Equations (APE) applying Lighthill's Equation (LE), Ribner's Dilatation Equation (RDE) and the Perturbed Convective Wave Equation (PCWE), provided with acoustic source terms obtained from the incompressible LES. The turbulent recirculation zone is the most active region for generating acoustic sources. Among the two constituent components of the PCWE source term, the local pressure time derivative term turned out as clearly dominant in this region, so that PCWE and RDE predicted similar acoustic fields. The sub-grid scale (SGS) model applied in LES notably contributes only at high frequencies to the total LE source term, starting from f=2000 Hz for the lower Reynolds numbers and beyond for the higher. The mapping of source terms from the boundary layer resolving LES grid onto the typically coarser preferably uniform APE grid leads to lower high-frequency signal amplitudes for coarser APE mesh size in regions with small turbulent structures. The impact of this amplitude reduction on the predicted acoustics sound power levels was still very small, exhibiting relative differences less than 0.7% for the different APE meshes. Despite the LES-specific limitations expected from the decrease of directly resolved content for higher Reynolds number, the use of increasingly underresolved source terms did not significantly lower the accuracy of finally predicted acoustics. The comparison of the acoustic results against data from dedicated measurements generally showed very good agreement for all Reynolds numbers.

A comparison of in situ and impedance eduction experimental techniques for acoustic liners with grazing flow and high sound pressure level

On the application of acoustic liners for the reduction of jet-flap installation noise

Effect of source direction on liner impedance eduction with consideration of shear flow

Smart Acoustic Lining for UHBR Technologies Engine Part 1: design of an electroacoustic liner and experimental characterization under flow in rectangular cross-section ducts

Investigation of the Orifice Flow of Over-the-rotor Liner and Its Interaction with the Rotor Flow Field

Near-wall aerodynamic response of an acoustic liner to harmonic excitation with grazing flow

Experimental Studies on Sound Absorption Coefficients of Perforated Pipes with Bias-Grazing Flows at Low Mach and Strouhal Number

Influence of the Acoustic Liner in Large Eddy Simulation of Longitudinal Thermoacoustic Instability in a Model Annular Combustor

Efficient Impedance Eductions for Liner Tests in Grazing Flow Incidence Tube

Investigation of Extended-Tube Liners for Control of Low-Frequency Duct Noise

Evaluation of metal foam liners for broadband noise reduction of turbofan engines

Large Eddy Simulations of Supersonic Jet Flows for Aeroacoustic Applications

Smart Acoustic Lining for UHBR Technologies Engine Part 2: acoustic treatment at the intake of a scaled turbofan nacelle

Fan Noise Reduction by Acoustic Liners Combined with Fine-Perforated-Film: Noise Tests by a Small Turbofan Engine DGEN 380

Experiments with rectangular supersonic jets with potential noise reduction technology

Slanted septum and multiple folded cavity liners for broadband sound absorption

An acoustic-wave preserved artificial compressibility method for low-Mach-number aeroacoustic simulations

Hybrid aeroacoustic investigation of turbulent 90° pipe bend flow with source terms from Large-Eddy Simulation

Numerical study of flow and noise predictions for tandem cylinders using incompressible improved delayed detached eddy simulation combined with acoustic perturbation equations

Passive acoustic liners for aero-engine noise control: A review

Effects of acoustic liner on thermoacoustic instabilities in a premixed swirl combustor