Abstract:This thesis explores the thermal and mechanical phenomena occurring during the Cold Metal Transfer (CMT) additive manufacturing process of TC4 titanium alloy. The investigation delves into the effects of layer-by-layer deposition on the thermal cycles, stress distribution, and microstructural evolution of the additive manufactured specimens. Key findings include the identification of thermal accumulation with increasing deposition layers, leading to a decrease in cooling rates and a slight increase in the peak molten pool temperatures. The temperature profiles on the substrate exhibit cyclic patterns of peaks and troughs, which become smoother and exhibit less variance between maximum and minimum temperatures as deposition progresses. Stress analysis reveals that equivalent stress within the deposited layers decreases with the number of layers. This is attributed to the thermal stress accumulation and stress cycles induced by multiple thermal cycles, which initially increase the equivalent stress. However, a reduction in cooling rates over time and the effects of remelting facilitate the release of interlayer stress, resulting in minimal residual stress within the cooled specimens. Microstructurally, the TC4 titanium alloy specimens are characterized by the presence of primary β phase spanning across multiple deposition layers, growing in the direction of additive manufacturing. The accumulated heat input from increased layering enhances the growth of the primary β phase.The specimens' microstructure features a basketweave pattern comprised of α' martensite, α, and β phases, with α' martensite directly transformed from the primary β phase. Repeated heating cycles foster diverse pathways for the secondary α phase's formation, leading to more pronounced, directionally parallel α phases and extensive basketweave structures within the specimen layers. Higher temperature gradients at specimen edges encourage the formation of needle-like α' martensite. This thesis contributes to the understanding of the thermal behavior, stress dynamics, and microstructural characteristics in TC4 titanium alloy during CMT additive manufacturing, highlighting the interplay between process parameters, thermal management, and material response.

Effect of External Magnetic Field on the Forming, Microstructure and Property of TC4 Titanium Alloy during the Directed Energy Deposition Arc Additive Manufacturing

Short Circuiting Transfer, Formation, and Microstructure of Ti-6Al-4V Alloy by External Longitudinal Magnetic Field Hybrid Metal Inert Gas Welding Additive Manufacturing

Effect of External Magnetic Field on Microstructures and Mechanical Properties of Ti-2Al-1.5Mn Titanium Alloy Resistance Spot Welds

Microstructure Modification of Twin-Wire Directed Energy Deposition-Arc Fabricated Γ-Tial Alloy Via Deposition Current Control

A novel magnetic field assisted powder arc additive manufacturing for Ti60 titanium alloy: Method, microstructure and mechanical properties

Numerical Simulation, Microstructure, and Properties of TC4 Plasma Arc Additive Manufactured Thin Wall

Effect of in-situ Transverse Magnetic Field on Microstructure, Mechanical Properties and Corrosion Resistance of the Directed Energy Deposited 316 L Stainless Steel

Comparative investigation of wire arc additive manufacturing of Al-5%Mg alloy with and without external alternating magnetic field

Microstructure regulation of titanium alloy functionally gradient materials fabricated by alternating current assisted wire arc additive manufacturing

Improvement of Microstructure and Mechanical Properties of TC4 Titanium Alloy GTAW based Wire Arc Additive Manufacturing by using Interpass Milling

Enhanced mechanical properties of Ti6Al4V alloy fabricated by laser additive manufacturing under static magnetic field

Effects of synchronized magnetic arc oscillation on microstructure, texture, grain boundary and mechanical properties of wire arc additively manufactured Ti6Al4V alloy

Preparation and characterization of CMT wire arc additive manufacturing Al-5%Mg alloy depositions through assisted longitudinal magnetic field

Modification of Microstructure and Mechanical Properties for Twin-Wire Directed Energy Deposition-Arc Fabricated Ti-48al-2cr-2nb Alloys Via Current Regulation

Fabrication of Titanium Aluminides via Powder-Cored Wire Arc Additive Manufacturing: Microstructural and Mechanical Characterization

Research on high efficiency deposition method of titanium alloy based on double-hot-wire arc additive manufacturing and heat treatment

Numerical Simulation-Based Study on the Microstructure of TC4 Titanium Alloy in CMT Additive Manufacturing

Fabrication of TC4 and Ti48Al bimetals by plasma arc additive manufacturing: Microstructure and mechanical properties

Effects of trace boron addition and different arc types on microstructure and mechanical properties of TC11/TC17 dual alloy fabricated by wire arc additive manufacturing

Microstructure and Performance of Solid Tc4 Titanium Alloy Subjected to the High Pulsed Magnetic Field Treatment

Controlling the Microstructure and Properties of Ti-6.5al-2zr-1mo-1v Components Fabricated by High-Deposition-Rate Wire Arc Additive Manufacturing