Abstract:This thesis explores the thermal and mechanical phenomena occurring during the Cold Metal Transfer (CMT) additive manufacturing process of TC4 titanium alloy. The investigation delves into the effects of layer-by-layer deposition on the thermal cycles, stress distribution, and microstructural evolution of the additive manufactured specimens. Key findings include the identification of thermal accumulation with increasing deposition layers, leading to a decrease in cooling rates and a slight increase in the peak molten pool temperatures. The temperature profiles on the substrate exhibit cyclic patterns of peaks and troughs, which become smoother and exhibit less variance between maximum and minimum temperatures as deposition progresses. Stress analysis reveals that equivalent stress within the deposited layers decreases with the number of layers. This is attributed to the thermal stress accumulation and stress cycles induced by multiple thermal cycles, which initially increase the equivalent stress. However, a reduction in cooling rates over time and the effects of remelting facilitate the release of interlayer stress, resulting in minimal residual stress within the cooled specimens. Microstructurally, the TC4 titanium alloy specimens are characterized by the presence of primary β phase spanning across multiple deposition layers, growing in the direction of additive manufacturing. The accumulated heat input from increased layering enhances the growth of the primary β phase.The specimens' microstructure features a basketweave pattern comprised of α' martensite, α, and β phases, with α' martensite directly transformed from the primary β phase. Repeated heating cycles foster diverse pathways for the secondary α phase's formation, leading to more pronounced, directionally parallel α phases and extensive basketweave structures within the specimen layers. Higher temperature gradients at specimen edges encourage the formation of needle-like α' martensite. This thesis contributes to the understanding of the thermal behavior, stress dynamics, and microstructural characteristics in TC4 titanium alloy during CMT additive manufacturing, highlighting the interplay between process parameters, thermal management, and material response.

Numerical Simulation, Microstructure, and Properties of TC4 Plasma Arc Additive Manufactured Thin Wall

Fabrication of TC4 and Ti48Al bimetals by plasma arc additive manufacturing: Microstructure and mechanical properties

Microstructural evolution and mechanical property of Ti-6Al-4V wall deposited by continuous plasma arc additive manufacturing without post heat treatment

A novel magnetic field assisted powder arc additive manufacturing for Ti60 titanium alloy: Method, microstructure and mechanical properties

Electron Beam Welding and Post Heat Treatment of a New Near-Beta High-Strength Ti-4Al-5Mo-5V-5Cr-1Nb Alloy

Numerical Simulation-Based Study on the Microstructure of TC4 Titanium Alloy in CMT Additive Manufacturing

Heat Accumulation, Microstructure Evolution, and Stress Distribution of Ti–Al Alloy Manufactured by Twin‐Wire Plasma Arc Additive

Effect of substrate temperature on microstructure and mechanical properties of TiAl alloy fabricated using the twin-wire plasma arc additive manufacturing system

Heterogeneous microstructure evolution in Ti-6Al-4V alloy thin-wall components deposited by plasma arc additive manufacturing

Microstructure and Fatigue Properties of Ti-48Al Alloy Fabricated by the Twin-Wire Plasma Arc Additive Manufacturing

Improvement of Microstructure and Mechanical Properties of TC4 Titanium Alloy GTAW based Wire Arc Additive Manufacturing by using Interpass Milling

Dynamic Mechanical Properties of TC11 Titanium Alloys Fabricated by Wire Arc Additive Manufacturing

A comparison on microstructure features, compression property and wear performance of TC4 and TC11 alloys fabricated by multi-wire arc additive manufacturing

Fabrication of γ-TiAl intermetallic alloy using the twin-wire plasma arc additive manufacturing process: Microstructure evolution and mechanical properties

Microstructure and mechanical properties of as-built and heat-treated Ti-6Al-4V alloy prepared by cold metal transfer additive manufacturing

Controlling the Microstructure and Properties of Ti-6.5al-2zr-1mo-1v Components Fabricated by High-Deposition-Rate Wire Arc Additive Manufacturing

Effects of Heat Accumulation on the Arc Characteristics and Metal Transfer Behavior in Wire Arc Additive Manufacturing of Ti6Al4V

Mechanism of enhanced ductility of Ti–6Al–4V alloy components deposited by pulsed plasma arc additive manufacturing with gradient-changed heat inputs

Hybrid Fabrication of Cold Metal Transfer Additive Manufacturing and Laser Metal Deposition for Ti6Al4V: The Microstructure and Dynamic/Static Mechanical Properties

Influence of Heat Treatment on the Microstructure and Mechanical Properties of TC4 Alloy Fabricated by Selective Laser Melting

Influence of oxygen content in the shielding gas chamber on mechanical properties and macroscopic structure of Ti-6Al-4V during wire arc additive manufacturing