Abstract:The morphological evolution rules of MnS under different thermal deformation parameters and isothermal holding times are studied. Results indicate that under either low temperature and high deformation conditions or high temperature and low deformation, MnS fragmentation is more pronounced, resulting in more spherical MnS. With extended homogenization time, elongated MnS fractures, progressively transforming into spheroidal or ellipsoidal shapes before enlarging. The control of MnS inclusions is crucial in developing high‐quality nonquenched and tempered steel. Single‐pass compression experiments are conducted on F40MnVS steel using a Gleeble‐3800 thermomechanical simulation testing machine, and the hot deformation behaviors of MnS inclusions at temperatures of 950–1150 °C and strain rates of 0.01 s−1 are investigated. Based on the experimental results of hot deformation, the steel is isothermally homogenized after forging to study the effect of holding time on the morphology and characteristics of MnS. Results indicate that at a lower deformation temperature of 950 °C and increased deformation, the relative plasticity of MnS diminishes, reducing the aspect ratio from 3.38 to 1.44 and primarily causing MnS fragmentation. At 1150 °C, as deformation increases, the relative plasticity of MnS also increases, with the aspect ratio rising from 1.46 to 2.01, leading to the growth of MnS. Under either low temperature and high deformation conditions or high temperature and low deformation, MnS fragmentation is more pronounced, resulting in more spherical MnS. With extended homogenization time, elongated MnS fractures, progressively transforming into spheroidal or ellipsoidal shapes before enlarging. The diffusion of S primarily controls the fracture and growth of MnS during isothermal heating.

Revealing the morphology evolution and distribution of manganese sulphide in the 38MnS6 steel during continuous casting

Study on microsegregation model and MnS precipitation behavior of continuous casting ultra-low sulfur steel slab

Morphological Evolution of MnS During Hot Deformation and Isothermal Homogenization in Nonquenched and Tempered F40MnVS Grade Steel

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

In Situ Observation of Precipitation Behavior of MnS during Solidification of Steel Melt Intended for Production of Nonquenched and Tempered Steel

The Microstructure Formation in Slag Solidification at Continuous Casting Mold

Effect of sulfur content on precipitation behaviour of MnS-containing inclusions in X70 pipeline steel

Unveiling the effect of MnO/SiO2 ratios on the viscosity and structure of mold fluxes for high-Mn cryogenic steels

Analysis of MnS Inclusions Formation in Resulphurised Steel via Modeling and Experiments

Numerical understanding of MnS precipitation influence on solute micro-segregation during solidification

Interaction of MnS inclusion behaviors and macrosegregation during solidification by multi-phase modelling

Formation Mechanism of High‐MnO‐Content SiO2/SiO2–MnO–(CaO–Al2O3) Dual‐Phase Inclusions in Si–Mn‐Killed Steel

Effect of Bismuth Content and Heating Rate on MnS Inclusions in Free-Cutting Steel

Effect of M-EMS current intensity on the subsurface segregation and internal solidification structure for bloom casting of 42CrMo steel

The Three-Dimensional Morphology and Distribution of CaS Inclusions in Continuous Casting Slab of Ni20Mn6 Steel

Analysis and Control of Central Cracks in the Bloom Continuous Casting of Microalloy 49mnvs3 Steel

Research Status of High-Manganese High-Aluminum Steel and Key Points of Continuous Casting

Modeling of the as-cast structure and macrosegregation in the continuous casting of a steel billet: Effect of M-EMS

Three-Dimensional Macrosegregation Model of Bloom in Curved Continuous Casting Process

The Effect of Alloying Elements on Formation and Evolution Mechanism of Manganese‐Containing Inclusions in Medium/High‐Manganese Steels

Microstructure Evolution of 0. 19C-1. 53Si-2. 54Mn Bainite Steel in Continuous Cooling Process