Abstract:In recent years, the vacuum plume effects of the thruster on board have received considerable interest, including additional forces and moments, excessive heat loads, and contamination. Because of the cost and time requirements associated with space-based experiments, ground-based experiments are necessary to compliment the limited data obtained in space. The ground facilities must faithfully and consistently reproduce the space environment, especially the degree of dynamic interspace in which the thruster works. In order to maximize the facility's pumping rates, a total chamber pumping (TCP) concept is proposed and the technology is applied to the typical ground-based facilities of the STG in Germany DLR Research Centre and CHAFF-4 in University of Southern California. At the Beijing University of Aeronautics and Astronautics in China, a new vacuum plume effects experiment system (PES) is now under construction. Its main component is a cylindrical liquid helium-driven internal cryopump, which is fixed in a chamber with a length of 12.6m and a diameter of 5.2m. When a thruster is fired at typical mass flow of 2g/s, in order to maintain vacuum with a pressure 10 -3Pa (space quality), a pumping system must be installed with speed of several ten million litres per second. In order for the vacuum degree requirement to be realized, the design of the cryopump is guided by the major demand of the steady plume from 5N thruster, with a total heat load of about 500w. Based on the TCP concept, a design scheme of integral cryopump structure is proposed. Its outstanding advantage is a three-storey plume adsorption pump with an area of about 65m 2, which is mounted in the liquid helium cryogenic fins and increases the cryogenic area to 215m 2. The cryogenic fins of PES's pumping system are ribbed pipes made of stainless tube and copper fins. The integral structure has superior save space, material and cooling medium. In this paper, the details of the initial numerical calculation investigation of PES's cryopump pre-cooling process are presented. The most ideal proposal, using liquid nitrogen (LN 2) to cool down the cryogenic fins and plume adsorption pump to designated temperature, is recognized. The further cooling of the plume adsorption pump and cryogenic fins are driven by LHe. Through analysis and comparison of the cooling time and LHe consumption at the different flow velocities, the best pre-cooling strategy is obtained.

Pumping performance analysis of negative ion based neutral beam injector cryosorption pump prototype

Simulation Test of Natural Circulation Precooling for Cryogenic Pump System

Influence Of Pressurization On Cooling-Down Process With A Gas-Phase Inlet Natural Circulation For A Cryogenic Pump System

Design, Construction and Testing of the Prototype Cryogenic Circulation Centrifugal Pump for the High Energy Photon Source

A cryopump design with total chamber pumping concept and pre-cooling process analysis

Optimization and Experiment of Supercritical Helium Flow in Cryopump

Pumping Speed of Cryopump for Xenon

Natural Circulation Precooling Experiment of Cryogenic Pump System

The Design and Test of Plug-in Cryopanel Simulated Pumping System

Design of Power Supply System for the Prototype Rf-Driven Negative Ion Source for Neutral Beam Injection Application

Final design and manufacturing of the neutralizer for the negative ion-based neutral beam injector test facility of CRAFT

Experimental investigation for the operational performance improvement of cryogenic piston-type pump using subcooling effect for liquid hydrogen stations

Thermal Performance Analysis and Operation of the Spoke Cavity Cryomodules for C-ADS Injector-I

Modelling of Cryopumps for Space Electric Propulsion Usage

Structure design and analysis of RF ion source for negative ion source test facility

Liquid hydrogen centrifugal pump optimization based on reducing hydraulic loss and improving cavitation

Performance Study of Preloaded Cryogenic Bearings in Liquid Hydrogen Pump

Experimental Study on Natural Circulation Precooling of Cryogenic Pump System with Gas Phase Inlet Reflux Configuration

Design and thermal performance of spoke cavity prototype cryomodule of the Chinese Accelerator Driven Sub-critical system Injector-I

The Negative Beam Source with Single Driver for CRAFT NNBI: Design and Conditioning Results

Numerical and Theoretical Investigations of the Cavitation Performance and Instability for the Cryogenic Inducer