Abstract:The high-frequency pulse tube cryocooler (HPTC) has been attracting increasing and widespread attention in the field of cryogenic technology because of its compact structure, low vibration, and reliable operation. The gas-coupled HPTC, driven by a single compressor, is currently the simplest and most compact structure. For HPTCs operating below 20 K, in order to obtain the mW cooling capacity, hundreds or even thousands of watts of electrical power are consumed, where radiation heat leakage accounts for a large proportion of their cooling capacity. In this paper, based on SAGE10, a HPTC heat radiation calculation model was first established to study the effects of radiation heat leakage on apparent performance parameters (such as temperature and cooling capacity), and internal parameters (such as enthalpy flow and gas distribution) of the gas-coupled HPTC. An active thermal insulation method of cascade utilization of the cold energy of the system was proposed for the gas-coupled HPTC. Numerical simulations indicate that the reduction of external radiation heat leakage cannot only directly increase the net cooling power, but also decrease the internal gross losses and increase the mass and acoustic power in the lower-temperature section, which further enhances the refrigeration performance. The numerical calculation results were verified by experiments, and the test results showed that the no-load temperature of the developed cryocooler prototype decreased from 15.1 K to 6.4 K, and the relative Carnot efficiency at 15.5 K increased from 0.029% to 0.996% when substituting the proposed active method for the traditional passive method with multi-layer thermal insulation materials.

Experimental Investigation on High Performance Cryogenic Heat Transfer Based upon Natural Circulation Cooling

Advancing Cryogenic Electronic Cooling: A Case Study on Embedded Manifold Microchannels in Micromachined Joule-Thomson Coolers

Numerical Study on the Working Performance of a G-M Cryocooler with a Mechanically Driven Displacer

Inverse heat transfer problem and its application in analyzing cryogenic treatment process

Investigations on A Cryogenic Heat Transfer Unit Combining Natural Circulation Cooling and Two-Phase Closed Thermosyphon

Simulation Test of Natural Circulation Precooling for Cryogenic Pump System

Natural circulation performance in a new cryogenic heat transfer unit

Natural Circulation Precooling Experiment of Cryogenic Pump System

A NEW CRYOGENIC HEAT TRANSFER UNIT USED IN COOLING SUPERCONDUCTING MAGNET

Study on Cooling Capacity Characteristics of an Open-Cycle Joule-Thomson Cryocooler Working at Liquid Helium Temperature

Experimental Study on a Floating Scroll-Type Compressor Driving a Precooled JT Cryocooler

Experimental Study on Natural Circulation Precooling of Cryogenic Pump System with Gas Phase Inlet Reflux Configuration

Experimental and Dynamic Simulation Study of the Joule-Thomson Cryocooler Working at Liquid Hydrogen Temperature

Numerical Investigation on Thermal Performance Design of Cryogenic Compact Heat Exchangers with Serrated-Fin Channels

An experimental study of heat transfer characteristics of a cryogenic finned-tube heat exchanger

Experimental investigation on heat transfer performance of a cryogenic thermosyphon

Experimental and numerical study on an open-cycle Joule-Thomson cryocooler working at liquid nitrogen temperature

Performance improvement of a pulse tube cryocooler with a single compressor through cascade utilization of cold energy

Numerical investigation on thermal-hydraulic performance of variable cross section printed circuit heat exchanger

Research on Cryogenic Loop Heat Pipe Technology

Experimental investigation on the thermal performance of vapor chamber in a compound liquid cooling system