Abstract:Single stage G-M cryocoolers (GMCs) with high cooling capacity at 20-50 K provide significant benefit for the field of high temperature superconductors, however, their working efficiency can still be improved for commercial applications. Numerical simulations can serve as a valuable guide for precise optimization of the GMC because they allow one to study its internal operating characteristics. In this research, a twodimensional, transient model of a single stage GMC with a mechanically driven displacer is built and studied using computational fluid dynamics (CFD) simulation. The modelling method has been tested and experimentally verified. It enables a view of the instantaneous non-uniform flow and temperature distributions inside the GMC. Additionally, the effects of cold end channels on the heat transfer efficiency of the cold heat exchanger while operating at a large cooling power are analyzed. The results show that during certain periods of a cycle, most of the regenerator near the cold end remains at almost the same low temperature with no temperature gradient due to the small heat capacity of the materials compared to that of the helium gas; while most of the pressure drop occurs in the region near the hot end due to the high viscosity of helium-4. For a good cooling performance at low temperatures, the cold end channels should be distributed uniformly to guarantee a uniform flow and temperature distribution in the regenerator; while for a high output cooling power at high temperatures, they should be designed to enhance the heat exchange between the gas and the cold heat exchanger as much as possible. (C) 2017 Elsevier Ltd. All rights reserved.

A NEW CRYOGENIC HEAT TRANSFER UNIT USED IN COOLING SUPERCONDUCTING MAGNET

Advancing Cryogenic Electronic Cooling: A Case Study on Embedded Manifold Microchannels in Micromachined Joule-Thomson Coolers

EXPERIMENTAL RESEARCH OF THERMAL-COUPLED VERSION HIGH FREQUENCY TWO-STAGE PULSE TUBE COOLER

Natural circulation performance in a new cryogenic heat transfer unit

Numerical Study on the Working Performance of a G-M Cryocooler with a Mechanically Driven Displacer

Simulation Test of Natural Circulation Precooling for Cryogenic Pump System

Experimental Research on Low Supercooling of Ice Storage and Analysis of Its Energy Saving

Experimental Investigation on High Performance Cryogenic Heat Transfer Based upon Natural Circulation Cooling

Investigations on A Cryogenic Heat Transfer Unit Combining Natural Circulation Cooling and Two-Phase Closed Thermosyphon

Influence Of Pressurization On Cooling-Down Process With A Gas-Phase Inlet Natural Circulation For A Cryogenic Pump System

Natural Circulation Precooling Experiment of Cryogenic Pump System

Advance in Cryogenic System of Cryocooled Superconducting Magnet

Numerical investigation on cryogenic pulsating heat pipes with nitrogen

Recent Research and Development of Cryogenic Heat Pipes

Study on Cooling Capacity Characteristics of an Open-Cycle Joule-Thomson Cryocooler Working at Liquid Helium Temperature

Experimental investigation on heat transfer performance of a cryogenic thermosyphon

Experimental and Dynamic Simulation Study of the Joule-Thomson Cryocooler Working at Liquid Hydrogen Temperature

Thermal design of a novel heat sink cooled by natural convection with phase transition in the series loop

Study on Forced Flow Cooling of Superconducting Magnet for Compact Synchrotron

A Long-Life, High-Capacity and High-Efficiency Cryogenic System Developed for High-Tc Superconducting Magnet Applications

Experimental Study on Natural Circulation Precooling of Cryogenic Pump System with Gas Phase Inlet Reflux Configuration