Abstract:3D-printed carbon fiber composites hold significant potential in aerospace applications because of their lightweight, high strength and complex structure fabrication capabilities. However, additive manufacturing characteristics such as high porosity, anisotropy and continuous fiber content significantly affect the mechanical properties of printed parts. The aim of this study is to investigate the influence of hybrid printing of short and continuous carbon fibers on the mechanical properties and failure mechanisms of composites and to develop a model to predict elastic properties considering porosity. First, mechanical testing and characterization of short and continuous fiber reinforced polyamide (nylon) print filaments are performed. The results indicate that the elastic modulus and ultimate strength of continuous carbon fiber filaments reach 60 GPa and 1500 MPa, respectively, while the strength and elastic modulus of short carbon fiber filaments reach 60 MPa and 1 GPa, respectively. Then tensile specimens with different continuous fiber orientations and different continuous fiber placement sequences are printed and tested using a multi-material 3D printing technique. The specimens are characterized before and after testing using scanning electron microscopy and microscopy to assess the porosity and failure mechanisms of specimens with different configurations. The results show that the mechanical properties of the printed parts are much lower than those of the print filaments, which proves the serious negative impact of the material extrusion process on the mechanical properties of the printed structural parts. Finally, an analytical method for predicting the elastic behavior of printed composites is developed by introducing the porosity factor in the volume-averaged stiffness model. For continuous and short fiber filled composites with different fiber contents and printing orientations, the predicted results are in agreement with the experiments, and the prediction error is greatly reduced from 30% to less than 5%.

Experimental and Numerical Investigation of an Innovative 3DPC Thin-Shell Structure

Investigation of the Internal Structure of Hardened 3D-Printed Concrete by X-CT Scanning and Its Influence on the Mechanical Performance.

Novel 3D FRP System Used for More Effectively and Readily Strengthening of Precast Concrete Elements

Novel Ductile FRP System for Concrete Reinforcement: Concept and Experimental Characterization

Integrated self-monitoring and self-healing continuous carbon fiber reinforced thermoplastic structures using dual-material three-dimensional printing technology

Evaluation of Carbon Fiber-Embedded 3D Printed Structures for Strengthening and Structural-Health Monitoring

Self-monitoring Continuous Carbon Fiber Reinforced Thermoplastic Based on Dual-Material Three-Dimensional Printing Integration Process

3D FRP Reinforcement Systems for Concrete Beams: Innovation towards High Performance Concrete Structures

Experimental and Theoretical Studies on 3D Printed Short and Continuous Carbon Fiber Hybrid Reinforced Composites

Compressive Behavior of FRP-confined 3D Printed Ultra-High Performance Concrete Cylinders

Mechanical behavior of FRP sheets reinforced 3D elements printed with cementitious materials

Novel Ductile FRP System for Concrete Reinforcement:

Three‐Point Bending Properties of 3d‐printed Continuous Carbon Fiber Reinforced Heterogeneous Composites Based on Fiber Content Gradients

Bending performance and failure behavior of 3D printed continuous fiber reinforced composite corrugated sandwich structures with shape memory capability

3D printing of FRP grid and bar reinforcement for reinforced concrete plates: Development and effectiveness

Triaxial compressive behavior of 3D printed PE fiber-reinforced ultra-high performance concrete

Behavior of 3D-printed HPC plates with FRP grid reinforcement under bending

3D Printing for High Performance Fiber Reinforced Polymer Composites

Mechanical Properties and Failure Mechanism of 3D Printing Ultra-High Performance Concrete

Development of 3D-printable ultra-high performance fiber-reinforced concrete for digital construction

Performance Evaluation of Reinforced Concrete Beam with 3D-Printed Permanent Formwork