Abstract:The objective of this paper is to determine how the high-voltage discharging metal vapour deposited on the nearby ceramic inner surface influences the breakdowns of gaps between centre shield and end shield in vacuum interrupters. Two types of shield materials were selected, namely copper and stainless steel. The end curvature radius of the shield was 3 mm. The distance between the shields could adjust manually from 4 to 8 mm. The distance between the shields and ceramic was 3.5 mm. The negative polarity standard lightning impulse voltage (12/50 μs) was repeated for 900 operations based on an up-and-down method. The experimental results illustrated that the metal deposition layer on the inner surface of the ceramic envelope significantly influenced the breakdown voltage of the shield gaps. At a shield gap distance of d = 4 mm, the breakdown voltage of the shield gap increased from an initial lower voltage to the saturation voltage by approximately 200 operations. Then, the breakdown voltage decreased to a lower voltage range during only 50 operations, and the breakdown voltage maintained at this lower voltage range until the end of 900 operations. Furthermore, as the shield gap distance increased from d = 4 to 6 mm and 8 mm, the breakdown voltage also maintained at this lower voltage range. A metal deposition layer was formed on the inner surface of ceramic by repetitive application of the lightning impulse voltage. To analyse the influence of the metal deposition layer, the electric field distributions were calculated for the original vacuum interrupter and the vacuum interrupter with the metal deposition layer on the ceramic inner surface. The simulation results suggested that the metal deposition layer took part in the breakdown path between the shield gaps and deteriorated the insulation performance.

Influence of switching operations on the vacuum interrupter dielectric strength

Dielectric characteristics of vacuum circuit breakers with CuCr and CuBi contacts before and after short-circuit breaking operations

Interdependence of Pressure and Shield Potential in Interrupter of Vacuum Circuit Breaker

Recovery of breakdown strength of a vacuum interrupter after extinction of high currents

Study on the Dielectric Recovery Strength of Vacuum Interrupter in MVDC Circuit Breaker

Physics of high-current interruption of vacuum circuit breakers

Research on Contact Structure in Vacuum Interrupter for DC Breaking Capability

Experimental investigation on magnetically controlled air arc oscillation characteristics for DC interruption

Optical Diagnostics of Vacuum Arc in the process of DC Interruption

Breakdown of shield gaps in vacuum interrupters

On the Relationship Between Internal Pressure and Permittivity in the Interrupter of VCB

Investigation of Arc Characteristics of a DC Vacuum Circuit Breaker With Double-Break Under Asynchronous Interrupting

A New Measurement Method of Contact Conditions in a Vacuum Circuit Breaker With the Field Emission Current During the Closing Operation

Experimental Study on Fast Isolating Switch with Vacuum Multi-breaks

Study of Arc Interruption Characteristics under Rated Current in Low Voltage Circuit Breakers

Evolution and interruption characteristics of DC vacuum arc under Halbach transverse magnetic fields

Transient Current Interruption Characteristics of a Novel Mechanical DC Circuit Breaker

Research of simulation and experiment on arc characteristics of gas mechanical switch

The Analysis of the Thermal Processes Occurring in the Contacts of Vacuum Switches During the Conduction of Short-Circuit Currents

Experiment Researches on Cold State Dielectric Recovery Characteristics in High Voltage SF6 Circuit Breakers

A Passive Oscillation DC Breaking Scheme Based on Enhanced Vacuum Interrupter