Multiscale Glass Fiber/Epoxy Nanocomposites Incorporated with Graphene and Zinc Oxide Nanoparticles: Enhanced Mechanical Properties
Barshan Dev,Shah Ashiquzzaman Nipu,Md Ashikur Rahman,Khondokar Raihan Mahmud,Maksudur Rahman Riyad,Md Zillur Rahman
DOI: https://doi.org/10.1002/mame.202400245
2024-09-13
Macromolecular Materials and Engineering
Abstract:The mechanical properties of multiscale glass fiber/epoxy composites by incorporating graphene and zinc oxide nanoparticles improve with a lower content of graphene nanoparticles (GNPs). Composites containing 0.5 wt.% GNPs exhibit enhanced mechanical properties. These composites can potentially be applied to the aerospace (i.e., wing surfaces and radomes), automotive (body panels and structural components), marine (i.e., boat hulls, yachts, and ships), and construction industries. This study fabricates multiscale glass fiber/epoxy composites by incorporating graphene nanoparticles (GNPs) and zinc oxide nanoparticles (ZnO NPs) to investigate the influences of NPs on the mechanical properties of composites. The composites are manufactured using the compression molding technique with different GNP contents (i.e., 0, 0.5, 1, and 1.5 wt.%), whereas the contents of glass fibers and ZnO NPs remained the same at 40 and 4 wt.%, respectively. Their mechanical properties, chemical compositions, and fracture morphologies are then evaluated. It is found that the mechanical properties of composites improve significantly at a lower content (i.e., 0.5 wt.%) of GNPs and tend to decrease at higher contents (i.e., 1 and 1.5 wt.%). The composite is composed of 0.5 wt.% GNPs exhibit maximum tensile modulus and strength of 6.74 GPa and 230.25 MPa, and flexural modulus and strength of 16.43 GPa and 831.79 MPa, respectively, impact strength of 47.25 kJ m−2, and maximum hardness (97.96 Shore D), among all nanocomposites. Moreover, fracture morphologies reveal that composite failure is predominately caused by fiber breakage, fiber‐matrix debonding, voids, and GNP agglomeration. The outcomes of this study provide some insights to promote the application of manufactured multiscale composites in the aerospace, automotive, and marine industries.
materials science, multidisciplinary,polymer science