Abstract:Tensile and flexural performance of carbon‐fiber epoxy composites with carbon fibers electrophoretically coated with carboxyl graphene and their failure mechanisms. Polymer composites reinforced with carbon fiber (CF) are strong, light weight and corrosion‐resistant, and have a wide range of applications in automobile, sports, aerospace, wind energy etc. but are prone to fail at the interface of epoxy and fiber due to weak interfacial adhesion between the fiber and epoxy. Formation of an interphase region with a continuous gradation of properties between fiber and the epoxy can potentially delay failure. Development of a larger interphase can be facilitated by the inclusion of graphene platelets on carbon fiber surface through various deposition processes. The present investigation utilizes a unique combination of magnesium nitrate hexahydrate and carboxyl graphene (G‐COOH) to create a colloidal solution for the particulate type deposition of G‐COOH onto carbon fibers through electrophoretic deposition (EPD). Four layers of EPD deposited carbon fibers have been used to make the composite using vacuum assisted resin transfer molding technique. Tensile and flexural tests have been conducted on the pristine and 0.45 wt% of G‐COOH deposited carbon fiber (0.45G‐COOH CF) epoxy composite. G‐COOH addition leads to thickening of the interphase which has been confirmed through energy‐dispersive x‐ray spectroscopy line scanning. The tensile and flexural strength properties of the carboxyl graphene deposited composites exhibited an increase of 62% and 12% respectively. These improvements can be ascribed to the deposition of carboxyl graphene particles on the fiber and an enhancement in interphase thickness. Moreover, the addition of G‐COOH in composites resulted in a 38% increase in tensile strain. The interlaminar shear strength (ILSS) and void content measured in 0.45G‐COOH CF have been compared with pristine carbon fiber composite as well as 1.3 wt% of carboxyl graphene (1.3G‐COOH) deposited carbon fiber fabric composite that had a film type morphology of G‐COOH deposition. There is only a slight decrease in ILSS of 0.45G‐COOH carbon fiber composites occurred compared to pristine carbon fiber composites. The film type morphology of carbon fiber composite showed the highest void content and lowest ILSS compared to other composites. The fracture surfaces of the failed composites were thoroughly examined through scanning electron microscope and they showed that the failure mechanisms in both tension and flexural loading were severely affected by the presence of G‐COOH. Highlights Optimization of electrophoretic deposition process parameters for carboxyl graphene deposition on carbon fiber fabrics. Enhancement composite strength through the particle type deposition of carboxyl graphene over film type deposition. Evaluation of the tensile, flexural and interlaminar shear strength of particle type carboxyl graphene deposited composite. Identified the failure mechanisms of these tests.

Graphene-based high-performance pseudo-ductile glass-carbon/epoxy composites

Mechanical Response of Glass-Epoxy Composites with Graphene Oxide Nanoparticles

Enhanced mechanical properties of glass fibre epoxy composites by 2D exfoliated graphene oxide filler

Mechanical properties and fracture resistance of three-dimensional graphene/polymer composites

Epoxy Resin Composites with Commercially Available Graphene: Toward High Toughness and Rigidity

A three-dimensional multilayer graphene web for polymer nanocomposites with exceptional transport properties and fracture resistance

Mechanical and quasi-static puncture behavior of hybrid glass/Kevlar/carbon fiber laminate composites with graphene nanoparticles

Multiscale Glass Fiber/Epoxy Nanocomposites Incorporated with Graphene and Zinc Oxide Nanoparticles: Enhanced Mechanical Properties

Performance Improvement of Glass Fiber/Epoxy Composites Upon Integrating with N-(2-Aminoethyl)-3-aminopropyltrimethoxysilane Functionalized Graphene Oxide

An unexpected hardening behaviour of carbon-fiber epoxy composites under flexural fatigue loading and its intensification by graphene nano-fillers

Planar Porous Graphene Woven Fabric/Epoxy Composites with Exceptional Electrical, Mechanical Properties, and Fracture Toughness

Exceptional electrical conductivity and fracture resistance of 3D interconnected graphene foam/epoxy composites.

Three-Dimensional Graphene/Polymer Composites With Exceptional Multi-Functional Properties

Fabrication and characterization of graphene oxide and glass fiber‐based hybrid epoxy composites

Mechanical Characterization of Hybrid Nano-Filled Glass/Epoxy Composites

Mechanical Properties of Hybrid Graphene Nanoplatelet-Nanosilica Filled Unidirectional Basalt Fibre Composites

Effect of graphene oxide on tensile and flexural properties of carbon/glass hybrid fiber‐reinforced polymer composite

Mechanical properties of a carbon fiber reinforced epoxy resin composite improved by integrating multi-walled carbon nanotubes and graphene nanoplatelets

Thermal behaviour of graphene nanoplatelets and multiwalled carbon nanotubes filled-glass fibre-reinforced epoxy composites

Graphene-based composite materials

Tensile and flexural strength enhancement in carbon‐fiber epoxy composites using a novel method of particle type electrophoretic deposition of carboxyl functionalized graphene on carbon fiber