Abstract:Combining two or more polymers as a blend is necessary rather than synthesizing new ones for the balance of polymer properties for end-use applications. This work introduces a sustainable polymer blend (matrix) for high-impact applications, as the accessibility and cost of production of these high-impact polymers keep souring. This was achieved by designing an experiment using design expert v10.0 to account for the number of experimental runs and optimise the polymer blend. Mechanical, dynamic mechanical, and temperature effects were considered on the blended polymer. Sixteen (16) experimental runs were generated with blend ratio as the independent variable and Impact Strength (IS) and Tensile Strength (TS) as the responses. The optimal blend ratio was obtained for wPP, PP and NR as 23, 30 and 47% respectively. While, the optimum conditions for maximum impact and tensile strengths from the D.E was 241.62 J/m and 118.04 MPa respectively, with a desirability of 0.973. While the validated values obtained were 248.9 J/m; with errors of 2.93% and 120.14 MPa; with an error of 1.75% respectively. Thermogravimetry analysis revealed a single peak degradation for sp17, sp18, and sp19 (control samples) while multiple degradation peaks were observed for the blends. It was believed to be a result of different times for degradation of the individual components forming the polymer blend. Also, the T d onset started around 300 °C and the T d offset was around 500 °C for all tested samples. While, the Dynamic Mechanical Analysis (DMA) showed that there was an improvement in the T g and damping factor for sp5 (109 °C, 0.171) as compared to sp17 and sp18 (81.1 °C, 0.089 and 104.3 °C, 0.061), but no improvement was recorded for storage and loss moduli. SEM micrographs showed a good surface morphology for the blend with optimal mechanical and thermal properties. The blend can be utilized for engineering applications, including matrices for body armour, helmets, car bumper, etc.

Entropy Barrier Mitigation and Harnessing Localized Upcycled Graphene Nanoplatelets in Polypropylene/High-Density Polyethylene Nanoblends

Fabrication of High-Performance PP/Graphene Nanocomposites Via Friedel–Crafts

Utilizing Upcycled Graphene Nanoplatelet-Coated Glass Fibers as a Performance Booster and Compatibilizer for Enhanced Mechanical Performance of Polypropylene/Glass Fiber/Graphene Nanoplatelet Composites

Enhancing polypropylene composites: synergistic effects of graphene nanoplatelets and glass fibers on mechanical and thermal properties

The synergistic effects of micro-and nano-fillers on the properties of polyamide 11/poly (lactic acid) blend

Graphene/polyethylene nanocomposites: Effect of polyethylene functionalization and blending methods

Mechanical performance of pe reinforced with graphene nanoplatelets (GNPs): Effect of composition and processing parameters

Interfacial Engineering of Polypropylene/graphene Nanocomposites: Improvement of Graphene Dispersion by Using Tryptophan As a Stabilizer

Innovative hybrid nanocomposites of recycled polyethylene terephthalate/polyamide 11 reinforced with sepiolite and graphene nanoplatelets

Largely Enhanced Thermal and Mechanical Properties of Polymer Nanocomposites Via Incorporating C60@graphene Nanocarbon Hybrid

Optimization of Mechanical Performance of Compatibilized Polypropylene/Poly(Ethylene Terephthalate) Blends Via Selective Dispersion of Halloysite Nanotubes in the Blend

Analysis on Isotropic and Anisotropic Samples of Polypropylene/Polyethyleneterephthalate Blend/Graphene Nanoplatelets Nanocomposites: Effects of a Rubbery Compatibilizer

Investigation on mechanical, electrical and morphological of high-density polyethylene (HDPE) reinforced with different particle size and composition of graphene nanoplatelets (GNP)

Simultaneous Enhancement on Thermal and Mechanical Properties of Polypropylene Composites Filled with Graphite Platelets and Graphene Sheets

Effect of Graphene on the Mechanical Properties of Recycled High-Density and High-Molecular-Weight Polyethylene Blends

Mechanical properties of in situ modified graphene nanosheets‐reinforced polypropylene

Synthesis of Polypropylene- Grafted Graphene and Its Compatibilization Effect on Polypropylene/ Polystyrene Blends

Mechanical and Dielectric Properties of Graphene Incorporated Polypropylene Nanocomposites Using Polypropylene-Graft-maleic Anhydride As a Compatibilizer

Mechanical, physical and thermal properties of waste polypropylene/polystyrene/natural rubber (wPP/PS/NR) blends

i PP/HDPE blends compatibilized by a polyester: An unconventional concept to valuable products

Revolutionizing transportation composite structures: Lightweight, sustainable, and multi-scale hybrid design through waste tire-driven graphene, hemp fiber, and bio-based overmoulding