Abstract:Different functionalities of materials based on indium tin oxide and fabricated at soft conditions were investigated with the goal of being used in a next generation of solar photovoltaic devices. These thin films were fabricated in a commercial UNIVEX 450B magnetron sputtering. The first studied functionality consisted of an effective n-type doped layer in an n-p heterojunction based on p-type crystalline silicon. At this point, the impact of the ITO film thickness (varied from 45 to 140 nm) and the substrate temperature (varied from room temperature to 250 °C) on the heterojunction parameters was evaluated separately. To avoid possible damages in the heterojunction interface, the applied ITO power was purposely set as low as 25 W; and to minimize the energy consumption, no heat treatment process was used. The second functionality consisted of indium-saving transparent conductive multicomponent materials for full spectrum applications. This was carried out by the doping of the ITO matrix with transition metals, as titanium and zinc. This action can reduce the production cost without sacrificing the optoelectronic film properties. The morphology, chemical, structural nature and optoelectronic properties were evaluated as function of the doping concentrations. The results revealed low manufactured and suitable films used successfully as conventional emitter, and near-infrared extended transparent conductive materials with superior performance that conventional ones, useful for full spectrum applications. Both can open interesting choices for cost-effective photovoltaic technologies.

Influence of the Oxygen during the Deposition of an Indium Tin Oxide Thin Film by Magnetron Sputtering for Heterojunction Solar Cells

Influence of Deposition Parameters of ITO Films on the Performance of HJT Solar Cells

Modulation of Optical and Electrical Properties of Sputtering-Derived Amorphous Ingazno Thin Films by Oxygen Partial Pressure

Effect of Oxygen Flow Rate on the Optical, Electrical, and Mechanical Properties of DC Sputtering ITO Thin Films

Effects of Gas Parameters on Properties of In2O3 Thin Films Deposited by Magnetron Sputtering

Study of hydrogen influence and conduction mechanism of amorphous indium tin oxide for heterojunction silicon wafer solar cells

Investigating the properties of tin-oxide thin film developed by sputtering process for perovskite solar cells

The role of O2 in CdSeTe thin film deposition and CdSeTe/CdTe solar cell performance

Effects of processing parameters on crystalline structure and optoelectronic behavior of DC sputtered ITO thin film

Theoretical Study of Oxygen Vacancy on Indium Oxide for Promoted Photothermal Catalytic Water Splitting

Oxygen partial pressure influenced stoichiometry, structural, electrical, and optical properties of DC reactive sputtered hafnium oxide films

Elemental distribution and oxygen deficiency of magnetron sputtered ITO films

A new investigation of oxygen flow influence on ITO thin films by magnetron sputtering

Effect of Oxygen Flow Rate on Properties of Aluminum-Doped Indium-Saving Indium Tin Oxide (ITO) Thin Films Sputtered on Preheated Glass Substrates

Investigation of optoelectronic properties of tin-doped indium oxide thin films and contact resistivity with silver film: Role of oxygen concentration variation during sputter deposition

The Impact of Partial O_2 Pressure in ITO Deposition Process

Roles of Low Temperature Sputtered Indium Tin Oxide for Solar Photovoltaic Technology

Effect of hydrogen plasma treatment and oxygen deficiency on conducting properties of In$_2$O$_3$:Sn thin films

INFLUENCE OF PROCESS PARAMETERS ON OPTICAL AND PHYSICAL PROPERTIES OF ITO THIN FILM

X-Ray Photoelectron Spectroscopy Studies Of Indium-Tin-Oxide Treated Via Oxygen Plasma Immersion Ion Implantation

Effect of power density on compositional and structural evolution of ITO thin film by HiPIMS method