Abstract:As an important load-bearing component, wire rope is widely used in engineering structures. It is significant to conduct nondestructive testing on the wire rope and ensure its safe operation. The magnetic signal inspection based on the self-magnetic flux leakage (SMFL) effect can effectively identify the location of defects. However, the current research on the magnetic signal of defects with the influence of various factors is insufficient. Based on the SMFL inspection of defective steel wire under tensile load, it puts forward an approach to evaluate the defect through the peak-valley value of the normal component H p ( y ) of the magnetic signal. Then the numerical simulation of force-magnetic coupling with COMSOL Multiphysics is conducted. Finally, the additive model is applied to analyze the factors affecting the magnetic characteristic parameters. The results show that the peak-valley values of H p ( y ) with different sizes of defects increase first and then decrease with the increase of load, which can be used to evaluate the stress state of the defective steel wire; According to the nonlinear force-magnetic coupling model based on the thermodynamic relation under the constant weak magnetic field, the SMFL field of the defective steel wire is calculated through the magnetization constitutive relationship using the representative stress of the refined domains at the defect; By comparing and verifying the results simulated and experimental, the additive model is further introduced to quantitatively analyze the magnetic signal of the defect considering the combined action of the defect depth h , the defect width w and the external load F . The defect depth h has a significant influence on the magnetic signal characteristics, which can be estimated by the additive model with determined w and F . This study is expected to provide some references for the quantitative analysis of defects under loading.

Finite Element Simulation and Test of Metal Magnetic Memory Detection of Wire Rope Under Weak Magnetic Field

Theoretical and experimental research on wire rope magnetic memory testing under weak magnetic excitation

Quantitative Study on Cross Section Damage of Steel Wire Rope Based on Magnetic Signal Characteristics Under Weak Magnetic Excitation

Research on Quantitative Detection of Wire Rope Damage Based on Weak Magnetic Excitation

Research on the force-magnetic coupling of steel wire and defect evaluation based on self-magnetic flux leakage effect

Simulation analysis and experimental investigation of wire rope leakage magnetic field detection

Analysis of the Eccentric Problem of Wire Rope Magnetic Flux Leakage Testing

Wire Rope Defects with the Micro-magnetic NDT Technology

A Sensor for Broken Wire Detection of Steel Wire Ropes Based on the Magnetic Concentrating Principle

An Anisotropic Magneto-Mechanical Model of Ferromagnetic Materials for the Magnetic Memory Testing Method

Characterization of the Elastic-Plastic Region Based on Magnetic Memory Effect

Stress-Dependent Magnetic Charge Model for Micro-Defects of Steel Wire Based on the Magnetic Memory Method

A numerical simulation method of residual magnetic field signals for evaluating deformation-induced stress concentration in ferromagnetic materials

Study of metal magnetic memory (MMM) technique using permanently installed magnetic sensor arrays

Enhancing Wire-Rope Damage Signals Based on a Radial Magnetic Concentrator Bridge Circuit

Magnetic memory testing for high load rotating bending fatigue damage

Distinguish Abnormal Tensile and Torsional Stresses of Steel Wire Rope Using Magnetoelastic Effect.

Online Nondestructive Testing for Fine Steel Wire Rope in Electromagnetic Interference Environment

Experimental study on Strengthening the magneto-mechanical Coupling Effect of X80 Steel by Weak Magnetic Excitation

Stress State Detection Based on Metal Magnetic Memory Theory

Nondestructive Testing of Elongated Ferromagnetic Members Based on Extruded Structure